It is a genuine manufacturer-supplied item that is made for use with Powermate, Southland and Airstream lawn edgers. This item provides an identical replacement for a damaged or a missing drive shaft assembly that was installed on a new unit. Check the owner's manual and the diagrams for your model to ensure the correct repair procedure. Note, this high-quality assembly is made of durable metal and is sold individually. A wrench set and pliers might be needed when replacing this component.
Troubleshooting
This part works with the following brands:
Powermate
Southland
Airstream
This part works with the following products:
Edger
Videos For installing this part.
?
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Edger repair
Edger is working like new again!
Guest - June 27, 2019
Verified Purchase
★★★★★
★★★★★
Looks stronger than the original
Showed up fast. This was not listed for my craftsman edger. Decided to order it anyway seeing as the craftsman part was no longer available. It only had two holes near the end not three like the craftsman no worry the third hole was not used anyway. The pulley was a different diameter figured I could always swap it if needed. I put it together and everything worked perfect. So I did not swap the pulley.
Guest - September 18, 2019
Verified Purchase
★★★★★
★★★★★
Direct Replacement
Perfect fit for a part that was custom made to fit an old edger. Saved me from having to purchase a new gasoline edger.
Guest - May 6, 2020
Verified Purchase
★★★★★
★★★★★
Perfect replacement
I actually used the shaft on a old craftsman edger and it fits perfectly. The original part was discontinued by craftsman. I came upon this part by chance and I’m so glad I did.
Guest - November 27, 2021
Verified Purchase
★★★★★
★★★★★
Easy repair, worked perfectly
Everything working like new !
Guest - July 26, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed old parts
Inserted new drive shaft
Attached drive belt
Attached blade guard
Attached angle adjustment
Attached blade
The unusual story is sears sent two different \"replacement\" parts for the original broken piece. One was too wide and the other had the blade guard on the wrong side. Sea
... Read morers claimed the original part is no longer available. I found the exact replacement part needed at eReplacementParts. bought it, installed it and tested it out. works as good as new if not better. Thank you
Read less
Did you find this story helpful?
Thank you for voting!
The drive shaft assembly was cracked and needed to be replaced
Removed the spark plug wire and then removed and replaced the drive shaft assembly. It took about 45 minutes to disassemble and replace the new drive shaft assembly.
Did you find this story helpful?
Thank you for voting!
Drive shaft broke where it tee;ed in to the bearing shaft.
Removed connecting parts that held the shaft on the machine, 3 bolts and a shifter clip.
Took it to the bench and removed the blade and guard along with the angle selector.
Once completed the spring slid out.
To install the new shaft I did have to use a wire wheel and remove the powder coating, as the
shaft would
... Read morenot allow the angle selector to slide on easily.
Once that was assembled, just had to reattach to the edger.
1. Remove the belt cove housing 2 small screw,
2. removed the spring load for tilting,
3. remove the bolt at the end of the Drive Shaft Assembly.
4. remove the Drive Shaft Assembly,
5. Install the new Drive Shaft Assembly, just like you had removed it old
Drive Shaft Assembly
Watched a YT video and followed his steps sequentially as he was doing it. The actual part for my craftsman edger was no longer in production and I was searching YT and came across this quill replacement that looked like my edger. In the comments section another person said that he also had a Craftsman edger and could no longer get the
... Read morepart but decided to give this assembly a chance. He said it worked as advertised on his Craftsman edger. I took the chance and ordered the part from you and it worked out great. The only thing I had to do was swap out the belt pulley because the new one was larger. If I didn\'t do this the pulley covers would not have fit on the quill assembly.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
