Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Good fit
It fit great and was an easy installation. The hardest part was the initial disassembled. Once I was able to get the clutch bell loose from the screw on the small gear it was easy.
The only reason I didn’t give it 5 stars is because it took over a week to get the parts.
Good product
Guest - September 4, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The large gear removes easily, but the smaller(spur gear) was more difficult. Save time by using an impact act with allen head socket to remove the bolt. You\'ll have to m a makeshift puller to get the small gear out. Easy was is to take a piece of bar stock and drill a hole slightly larger than the bolt you just removed. Support it
... Read more with a couple of large nuts or something strong, thread the bolt back into the gear part way and tighten to remove the small gear. Polish the shaft of the new gear with crocus or emery before installing. Naturally grease the gears thoroughly be fore completing.
1. Removed blade.
2. Removed gear cover.
3. Removed bolt holding drive gear and clutch hub together. This was not easy. Was able to kludge together a brace to hold clutch hub stationary while backing out the bolt.
4. Drive gear and double set of bearings were withdrawn from case. Used small bearing puller to pull bearing
... Read mores off drive gear shaft.
5. Replaced drive gear with new one and used a deep socket same diameter as bearings to pound bearings back into place on drive gear shaft.
6. Replaced clutch assembly.
7. Lubed new gears and replaced into case.
8. Put case cover back on and installed new blade.
9. Tested
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16352788
Manufacturer Part Number: 530071258
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/edger/transmissions-and-clutches/"},{"position":2,"name":"530071258","title":"530071258","url":""}]
