11883955-1-M-Makita-452837-5-Hammer Case Cover

( Grid squares measure 1x1 inch )

11883955-1-S-Makita-452837-5-Hammer Case Cover

Hammer Case Cover 452837-5

Manufactured by:: Makita
ERP Number:: ERP11883955
Part Number:: 452837-5

$6.37

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

The hammer case cover attaches to the bumper and to the hammer case. This item is made of plastic and is priced as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with Makita impact drivers. A screwdriver and a set of pliers might be helpful during the installation of this part. It may become broken and will need to be replaced.

Troubleshooting

This part works with the following brands:

Makita

This part works with the following products:

Drill

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(2 rated repairs) ?

< Prev
1
Next >

Sort by:

Drill would hesitate

John from Homer Glen , Illinois

3 of 3 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers
Parts Used:: 650723-6, 452837-5, 424429-0, 419041-9

Take off back cover. remove all screws, take a picture of the switch to make sure you have the correct wires going to the proper terminals. Remove old switch and install new one in reverse order. While I was in there I replace the worn F/R Change Lever. Also replace missing bumper and cracked hammer case cover, they just snap on.

Did you find this story helpful?

The hammer case was broken and the hammer case complete had scratches and dents the ring spring was missed place and the bit sleeve was wobbly

Abdullah from Bronx , New York

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 452837-5, 424429-0, 326068-1, 140946-9, 231951-8

I removed the bit sleeve with the washer, spring and the silver balls.

Loosened the hammer cover, removed the gear assembly, removed the anvil and before I decided to put everything together with the new parts I Re-greased the gears and the inside of the new hammer case complete. Than I went ahead and re assembled everything ... Read more

Read less

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP11883955
Manufacturer Part Number: 452837-5

Brand	Model Number	Description
Makita	BTD146	Drill - Drill / Driver
Makita	LXDT03	Drill - Drill / Driver
Makita	LXDT03Z	Drill - Drill / Driver
Makita	LXDT04	Impact Driver - 18V LXT Lithium-Ion Cordless Impact Driver Kit
Makita	LXDT04C1	Drill - Drill / Driver
Makita	LXDT04CW	Impact Driver - Cordless Impact Driver
Makita	LXDT04Z	Drill - Drill / Driver
Makita	LXDT04Z1	Drill - Drill / Driver
Makita	XDT04	Drill - Drill
Makita	XDT04A	Drill - Drill / Driver
Makita	XDT04RW	Drill - Drill
Makita	XDT04Z	Drill - Drill