All of my power tools are cordless Makitas\'. Some do not have belt hooks. I added belt hooks to five of the cordless tools so that I would have them handy when working from a ladder.
I selected the best side of the tool upon which to mount the belt hook. Using the multi tool, I then cut a slot through the side of the tool, deep enough and wide enough to insert the belt hook. If the mounting flange of the belt hook mount was too long and protruded through the side of the tool and into the battery mounting slot, I use
... Read mored the cordless grinding tool to shorten the flange.
Once the mount was properly in place, I drilled a hole through the side of the tool in which to mount a fastening screw; a hole narrower than the diameter of the mounting screw. If the screw was too long because it protruded into the area of the battery, I again used the cutoff wheel to shorten the screw and to point the tip. The tip was pointed by not cutting completely through the center of the screw.
I did this for each of the five tools that needed belt hooks. Finally I added clear silicone sealant around each of the modifying mounts. All mounts are secure and work as intended.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10149281
Manufacturer Part Number: 346449-3
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
