Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great part, worked as expected
This was packed well, and worked to replace the bent and broken rack on an earlier model drill press, an Orbit 17" floor standing model, from when Jet first started importing them and before rebranding them as Jet tools.
Joshua - July 19, 2019
Verified Purchase
★★★★★
★★★★★
Drill press rack
The part showed up quickly and was in great condition. Price was great and so was the quality.
Guest - September 7, 2019
Verified Purchase
★★★★★
★★★★★
Half of the puzzle!
This is the exact right part for half of my repair of a Jet drill press. The second part of the repair has been a bit more problematic, but thanks to Jet technical support, I'm on the right track and ereplacement has that part in stock too!
Marcus - October 2, 2019
Verified Purchase
★★★★★
★★★★★
Fits perfect
Part fits and works perfect on a JDP-14JF. They don't have it listed for this specific drill model anywhere so I just bought it in hopes it would work and it is an exact fit
Guest - March 12, 2020
Verified Purchase
★★★★★
★★★★★
Easy repairs and parts worked as expected
Everything came in good condition and now my drill press works good
Guest - June 19, 2020
Verified Purchase
★★★★★
★★★★★
Drill press rack
Quick ship part fits packaged to prevent danage
Guest - October 15, 2021
Verified Purchase
★★★★★
★★★★★
Exact part, good quality, and fast shipping
This was the exact part that I needed. The rack for my jet drill press was broken when I bought it and I was having some trouble finding the right part until I found this website. OEM parts are more expensive but it’s worth it when your looking for parts that won’t fail in the future.
Guest - October 11, 2022
Verified Purchase
★★★★★
★★★★★
Hard to Find
The rack was easy to install on my very old craftsman drill press. My father-in-law gave me the drill press towards the end of his life and it means a great deal to me. Craftsman parts are very hard to find. Thank you for making this replacement part.
Guest - August 18, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I loosened the two allen screws that hold the top assembly on the shaft. Then you should get two people to lift the top assembly off of the shaft. It was very heavy and awkward. I took some time to clean the shaft with a wire brush and then 220 grit sandpaper. Finally using 0000 steel wool to create a smooth surface for the rack and t
... Read moreable assembly to move freely. Thus, preventing binding situations that bound the rack in the first place. Then, you bring the table to just above the top of the shaft and work the rack into the threads and slide the table back onto the shaft. Make sure that you sure that the arrow on the rack is pointing up. Place the top assembly back onto the shaft, align it with the base, and tighten the allen screws.
1. Loosen the 2 set screws that hold power head to column
2. Remove power head, 3 person job
3. Loosen & removerack clamp
4. Remove rack, table and table clamp/adjuster
5. Clean out pinion in table adjuster. Regressed
6. Clean column with Scotch Brite pad and WD-40
7. Reassemble in order. Ensure rack is
... Read more seated in upper and lower receivers
1. During refurbishment of my 35+ year old floor drill press, I had to replace the broken rack. I ordered a new rack for a JET drill press which has the same rack.
2. I disassembled the drill press, removed years of dried grease and oil from the shaft.
3. The upper rack holder was cracked. I made a circular clamp of alumin
... Read moreum bar stock and epoxied/bolted the clamp over the rack holder, drilled a hole to allow fastening the stiffened rack holder to the column with the set screw.
4. The repair was successful and all functions to raise, lower, and rotate the table support plate are functioning.
Remove drill press head.
Remove rack gear locking collar.
Remove gear and table raise/lower assembly.
Reinstall new gear and table raise/lower assembly.
Reinstall collar.
Reinstall drill head
Did you find this story helpful?
Thank you for voting!
The original rack broke under excess pressure by a novice operator that didn\'t realize there was a table lock that needed to be loosened before raising the table. Brute strenth was not the answer an
This rack worked for my Sears 137.229150 15 inch drill press. The rack is slightly shorter than original but that doesn\'t present a problem as the table still comes all the way up to meet the chuck so it\'s plenty long enough.
Others have described the installation process, but basically just loosen the set screws and li
... Read moreft off the head, loosen set screws on top collar and remove it. Loosen the table lock handle and slide the table and old rack up and off, then put the new rack against the table gear and slide them down to the bottom as a unit. There is an arrow on the rack to indicate the top vs bottom. Reattach the top collar being sure to keep it level all around so the table will be able to turn easily. Reattach the head and secure the set screws.
1. Removed motor/pulley head.
2. Removed top rack containment ring
3. Cranked old rack up through pinion gear
4. Cranked new rack down through pinion
5. Reinstalled the top rack containment ring
6. Reinstalled the motor/pulley head
DONE
Did you find this story helpful?
Thank you for voting!
Broken arm and missing work table. Also, replaced the height adjuster.
Replaced Rack- use allen wrench to loosen 2 allen screws that tighten drill press head to the post, remove drill press head (it\'s heavy get help to lift it) lift head off post, you can then remove rack ring by loosening set screw and slide it off post, then slide drill press table and rack off post together, replace old rack with new, th
... Read moree rack can just be lifted out and replaced with new rack from drill press table gear. Then hold together and slide table and rack back onto post, note up side of rack by arrow pointing up, then I had to replace my rack ring, if yours is okay just slide it back onto post with bevel facing down to hold rack in place on the angled edge of rack on the top, don\'t slide the ring down to tight against the rack it needs to be able to move freely when swinging the table around the post, tighten ring with set screw. Replaced Coil spring- loosen two nuts that hold coil spring and cover on and remove broken coil spring and cover, install new coil spring and cover, you will have to adjust spring tension by turning cover with spring a notch at a time until desired tightness. Hard to explain, but not really hard to do, I looked at youtube videos and still just had to figure it out as I did it. Good luck.
Read less
Did you find this story helpful?
Thank you for voting!
Drill press platform did not move up and down due to broken rack.
This rack was not listed as a replacement part for my drill press but the dimensions were the same and worked perfectly.
1. I removed the drill motor by loosening the set screws and lifted it off the post.
2 I removed the platform and rack by loosening and lifting off the post.
3 I cleaned the post and lubricated
... Read morewith oil.
4 I installed the platform and rack by sliding it onto the post. And secured the retaining clamp above the rack.
5 I installed the drill motor and secured it with the set screws.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
