17016192-1-M-Delta-1344258-Handle Assembly - Plastic Hand

( Grid squares measure 1x1 inch )

17016192-1-S-Delta-1344258-Handle Assembly - Plastic Hand

17016192-2-S-Delta-1344258-Handle Assembly - Plastic Hand

17016192-3-S-Delta-1344258-Handle Assembly - Plastic Hand

Handle Assembly - Plastic Hand 1344258

Manufactured by:: Delta
ERP Number:: ERP17016192
Part Number:: 1344258

Works with your model 17-898X!

$64.73

★★★★★

30 Reviews

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(37 rated repairs) ?

Works with your model 17-898X!

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Repair Instructions Model Cross Reference

Product Description

This is a genuine Delta crank handle which is found on many drill press models. It will directly replace a worn, broken or missing handle. Please note that this handle does include the set screw for securing it in place. The handle will fit the Delta drill press models listed in the section below, but it is not guaranteed to fit any other tools.

Frequently Purchased Together

Chuck Key

★★★★★

(11)

$35.00

Troubleshooting

This part works with the following brands:

Delta
Black and Decker

This part works with the following products:

Drill Press

Part# 1344258 replaces these:

1344257,

★

Customer Part Reviews

4.8

Average Rating (out of 5):

★★★★★

(30 Reviews)

Click to filter by ratings:

5 stars

27
4 stars

2
3 stars

0
2 stars

1
1 star

0

< Prev
1
2
3
Next >

Sort by:

★★★★★

perfect

Guest - May 8, 2019

Verified Purchase

★★★★★

Delta drill press table handle

Came in a timely fashion and was an exact fit. I could not get the part from the original manufacturer.

Guest - May 20, 2019

Verified Purchase

★★★★★

Easy replacement!

The handle for drill press was received in short time. Even better, the handle slipped right on. It took me longer to fine an Allen wrench to tighten it in the shaft.

Guest - September 30, 2021

Verified Purchase

★★★★★

Correct parts received for my old Delta floor drill press

I parts for my very old Delta floor standing drill press (drill key and handle to move the table up/down) were to replace ones that had been lost while it was in storage at a friends shop. The parts came on time and fit perfectly. I found them cheaper on another website, but when I read the BBB reviews for them I quickly steered clear of them and went with eReplacement Parts as their BBB reviews were OK, and any complaints posted against them were resolved fairly it seemed. Happy with my order and will order again from them if needed!

Guest - November 3, 2021

Verified Purchase

★★★★★

Replaced broken handle.

Just the part I needed. Older unit. Great to be able to find part. Thanks! Keep you for future needs.

Guest - February 19, 2022

Verified Purchase

★★★★★

Dug until they found it

Part was spot on. At first they couldn't find it and was even ready to pass it off then found it. Great job sticking with it

Guest - March 10, 2022

Verified Purchase

★★★★★

Perfect replacement

For quite a few years I worked with a broken handle and just didn't try to find a replacement as I knew that since it was a machine with a little age to it a handle would be almost impossible to find. I was amazed as to how easy it was to find a replacement on this web site not to mention the reasonable price and ease of replacement. There is no excuse to have broken equipment with this web site around.

Guest - April 20, 2021

Verified Purchase

★★★★★

This is exact replacement

New and perfect replacement. Great part and service

Guest - May 25, 2021

Verified Purchase

★★★★★

Fit perfectly

Guest - August 17, 2021

Verified Purchase

★★★★★

Quick and easy transaction

Guest - May 25, 2019

Verified Purchase

< Prev
1
2
3
Next >

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(37 rated repairs) ?

< Prev
1
2
3
Next >

Sort by:

The crank that is used to raise and lower the table broke.

Matt from Richfield, Minnesota

5 of 5 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

The handle that I received was much better quality that the original. I just slipped it on and tightened the set screw.

Did you find this story helpful?

Broken handle.

ken from DUNKIRK, New York

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

I just put the new handle on and tightened the set screw.

Did you find this story helpful?

Handle assembly broke

James from Coral Springs, Florida

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Removed the old piece & installed new

Did you find this story helpful?

Drill press raising handle broken

Richard from MARIETTA, Georgia

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Removed the remains of the broken handle and installed the new one.

Did you find this story helpful?

The handle broke

Karl from CHINO VALLEY, Arizona

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

I put the handle on the shaft and tightened the set screw

Did you find this story helpful?

The switch would not allow the machine to stay on..

Nathan from Seven Hills, Ohio

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 1344258, 905224

The repair was simple... Remove the two screws that held the switch in place.. Remove 4 wires on the back of the switch replace them on the new switch then reassemble the switch to the drill press.. And I\'m back in business.

The handle was easy.. Just an Allen Wrench disassemble and reassemble..
In Business. ... Read more

Read less

Did you find this story helpful?

Handle assembly was broken during a move.

William from Littleton, Massachusetts

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

1. Removed the old handle.
2. Installed the new handle.

Did you find this story helpful?

Plastic table lift handle broke.

James from Brainerd, Minnesota

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Simply removed broken plastic handle & replaced it with a far superior cast iron handle. Thank you for the far superior part.

Did you find this story helpful?

Drill press had a broken handle

John from BRIDGEPORT, Connecticut

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

I removed the set screw on the old handle and replaced it with the new one, it took less than 15 minutes.

Did you find this story helpful?

When moving it was dropped down the ramp and the handle was broken.

Dixie from HYMERA, Indiana

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Just put the replacement handle on, by removing the set screw from the old one. Then tighten the set screw on the new one.

Did you find this story helpful?

< Prev
1
2
3
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP17016192
Manufacturer Part Number: 1344258

Brand	Model Number	Description
Delta	11-980	Drill Press - Drill Press
Delta	11-985	Drill Press - Drill Press
Delta	11-990	Drill Press - Drill Press
Delta	14-040	Drill Press - Drill Press
Delta	14-070	Drill Press - 14&#34 Floor Drill Press
Delta	17-898X	Drill Press - Delta 17-898x Drill Press
Delta	17-900	Drill Press - 16-1/2&#34 Drill Press
Delta	17-925	Drill Press - Drill Press
Delta	17-965	Drill Press - Drill Press
Delta	17-968	Drill Press - Drill Press
Delta	17-990X	Drill Press - Drill Press
Delta	DP200	Drill Press - 10" Drill Press
Delta	DP250	Drill Press - Drill Press
Delta	DP300	Drill Press - 12" Drill Press
Delta	DP300L	Drill Press - 12" Crosshair Laser Drill Press
Delta	DP350	Drill Press - 12" Variable-Speed Bench Drill Press
Delta	DP400	Drill Press - Drill Press
Black and Decker	SM300	Drill Press - 10 Drill Press