17016192-1-M-Delta-1344258-Handle Assembly - Plastic Hand

( Grid squares measure 1x1 inch )

17016192-1-S-Delta-1344258-Handle Assembly - Plastic Hand

17016192-2-S-Delta-1344258-Handle Assembly - Plastic Hand

17016192-3-S-Delta-1344258-Handle Assembly - Plastic Hand

Handle Assembly - Plastic Hand 1344258

Manufactured by:: Delta
ERP Number:: ERP17016192
Part Number:: 1344258

Works with your model 14-070!

$60.42

★★★★★

30 Reviews

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(37 rated repairs) ?

Works with your model 14-070!

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

This is a genuine Delta crank handle which is found on many drill press models. It will directly replace a worn, broken or missing handle. Please note that this handle does include the set screw for securing it in place. The handle will fit the Delta drill press models listed in the section below, but it is not guaranteed to fit any other tools.

Frequently Purchased Together

Chuck Key

★★★★★

(11)

$31.82

Troubleshooting

This part works with the following brands:

Delta
Black and Decker

This part works with the following products:

Drill Press

Part# 1344258 replaces these:

1344257,

★

Customer Part Reviews

4.8

Average Rating (out of 5):

★★★★★

(30 Reviews)

Click to filter by ratings:

5 stars

27
4 stars

2
3 stars

0
2 stars

1
1 star

0

< Prev
1
2
3
Next >

Sort by:

★★★★★

Fit perfectly

Guest - August 17, 2021

Verified Purchase

★★★★★

Arrived quickly, was great and fit perfectly.

It was an easy fit a 13 year old girl installed it. Works great.

Guest - February 27, 2020

Verified Purchase

★★★★★

Made an older machine much more usable

I can now adjust the height of my power press without risking cutting my hand on a broken casting. Does the job!

Guest - April 16, 2020

Verified Purchase

★★★★★

fast shipping, part was exactly as described

new part,great condition. took minutes to install on my planner. back to work thank you

Guest - April 25, 2020

Verified Purchase

★★★★★

Replacement of broken handle

EreplacementParts are a great place to get parts that are according to manufactures today obsolete. I have a Delta drill press, the handle broke while trying to raise the table. EreplacementParts had just what I needed. It was easy to find, with fast delivery. I come to this website to get all my parts, would recommend this site to anyone looking for replacement parts.

Linda - May 13, 2020

Verified Purchase

★★★★★

great service

The handle works great, along with there prompt service, thanks you

Eric - May 19, 2020

Verified Purchase

★★★★★

Quick and easy transaction

Guest - May 25, 2019

Verified Purchase

★★★★★

As expected

Fit right. Works well.

Guest - June 5, 2019

Verified Purchase

★★★★★

No hassle service

Located hard to find parts I needed for an older drill press.

Guest - August 27, 2019

Verified Purchase

★★★★★

Found the parts I needed

Great place for difficult to find tool parts

Guest - October 18, 2019

Verified Purchase

< Prev
1
2
3
Next >

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(37 rated repairs) ?

< Prev
1
2
3
Next >

Sort by:

The crank that is used to raise and lower the table broke.

Matt from Richfield, Minnesota

5 of 5 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

The handle that I received was much better quality that the original. I just slipped it on and tightened the set screw.

Did you find this story helpful?

Broken handle.

ken from DUNKIRK, New York

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

I just put the new handle on and tightened the set screw.

Did you find this story helpful?

Handle assembly broke

James from Coral Springs, Florida

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Removed the old piece & installed new

Did you find this story helpful?

Drill press raising handle broken

Richard from MARIETTA, Georgia

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Removed the remains of the broken handle and installed the new one.

Did you find this story helpful?

The handle broke

Karl from CHINO VALLEY, Arizona

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

I put the handle on the shaft and tightened the set screw

Did you find this story helpful?

The switch would not allow the machine to stay on..

Nathan from Seven Hills, Ohio

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 1344258, 905224

The repair was simple... Remove the two screws that held the switch in place.. Remove 4 wires on the back of the switch replace them on the new switch then reassemble the switch to the drill press.. And I\'m back in business.

The handle was easy.. Just an Allen Wrench disassemble and reassemble..
In Business. ... Read more

Read less

Did you find this story helpful?

Handle assembly was broken during a move.

William from Littleton, Massachusetts

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

1. Removed the old handle.
2. Installed the new handle.

Did you find this story helpful?

Plastic table lift handle broke.

James from Brainerd, Minnesota

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Simply removed broken plastic handle & replaced it with a far superior cast iron handle. Thank you for the far superior part.

Did you find this story helpful?

Drill press had a broken handle

John from BRIDGEPORT, Connecticut

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

I removed the set screw on the old handle and replaced it with the new one, it took less than 15 minutes.

Did you find this story helpful?

When moving it was dropped down the ramp and the handle was broken.

Dixie from HYMERA, Indiana

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Parts Used:: 1344258

Just put the replacement handle on, by removing the set screw from the old one. Then tighten the set screw on the new one.

Did you find this story helpful?

< Prev
1
2
3
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP17016192
Manufacturer Part Number: 1344258

Brand	Model Number	Description
Delta	11-980	Drill Press - Drill Press
Delta	11-985	Drill Press - Drill Press
Delta	11-990	Drill Press - Drill Press
Delta	14-040	Drill Press - Drill Press
Delta	14-070	Drill Press - 14&#34 Floor Drill Press
Delta	17-898X	Drill Press - Delta 17-898x Drill Press
Delta	17-900	Drill Press - 16-1/2&#34 Drill Press
Delta	17-925	Drill Press - Drill Press
Delta	17-965	Drill Press - Drill Press
Delta	17-968	Drill Press - Drill Press
Delta	17-990X	Drill Press - Drill Press
Delta	DP200	Drill Press - 10" Drill Press
Delta	DP250	Drill Press - Drill Press
Delta	DP300	Drill Press - 12" Drill Press
Delta	DP300L	Drill Press - 12" Crosshair Laser Drill Press
Delta	DP350	Drill Press - 12" Variable-Speed Bench Drill Press
Delta	DP400	Drill Press - Drill Press
Black and Decker	SM300	Drill Press - 10 Drill Press