It is an authentic manufacturer-supplied part which is specially designed for Mr. Heater and Heatstar kerosene forced air heaters. The tube allows the air to travel from the pump. Over time the material may wear out and begin to crack eventually requiring a replacement. Note, this high-quality part is made of durable rubber and is sold as an individual component. To ensure the proper replacement procedure, refer to the appropriate diagram of your specific model.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(4 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
I had to order new fuel hoses for my heater after one year of ownership. I had not burned 5 gal. of fuel and the hoses were cracked that the heater would not start. I think I will report the incident
To find my problem I was on the phone with Mr Heater employees three different times and they couldn\'t help me. I finally discovered the problem after I took of the hood and looked at the hoses. The hose to the motor was cracked on the end so I cut that part off and reattached it so I figured that because I had fuel dripping off of my he
... Read moreater I must have a crack in the fuel line also. I removed that hose also and found that it was cracked on the back side of the hose and that it was pumping fuel onto the machine instead of it going to the burner. I cut off that end of the hose and reattached it and turned on the heater and it ignited instantly. I then turned off the heater and wiped down the heater because of the fuel that was dripping off of the heater and dried it down. After removing all the fuel that was on the outside of the heater I then restarted the heater and it works fine now.
Read less
Did you find this story helpful?
Thank you for voting!
Heater was not putting out heat it was just throwing Flames
1. Changed all the air lines as they were cracked from age.
2. Changed the fuel line as it also was cracked with age.
3.Changed the filter because it needed it.
4. Changed the Electrode Assembly because it was cheap.
5. Machine works great with all the new parts. Should last another 10 years
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
