This Genuine Manufacturer Approved replacement part is used on select Air Compressors. This tube is made out of Metal and it is Sold Individually. Please note Nuts and Fittings are Sold Separately. The outlet tube transfers air between the cylinder and the tank on an air compressor. The aluminum tube also helps to cool the air as it leaves the cylinder. After years of use under continual vibration, the ends of the outlet tube may begin to crack and leak.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Was exactly what I was looking for
Easy to find, easy to order, arrived early, fit perfectly
Guest - April 16, 2020
Verified Purchase
★★★★★
★★★★★
great part and easy website
the part works fine but it most likely needs a new compression nut. They offer that too. Include that with your order.
Guest - August 18, 2020
Verified Purchase
★★★★★
★★★★★
Perfect
Exact replacement part. Fast shipment.
David - April 19, 2021
Verified Purchase
★★★★★
★★★★★
Great part
The pipe fit great on my air compressor.
Guest - May 20, 2021
Verified Purchase
★★★★★
★★★★★
Not what it should be
When purchasing this outlet tube, I was under the impression that it was "bolt on". The tube requires a nut and "o" ring on one end and a compression fitting on the other end. Neither of which comes with the tube. Also, there is no mention that you need to purchase these parts separately. I'm usually very happy with parts I get from here but not this one. It's pretty simple, if extra parts are required to install something, they should come as a kit or you should be informed of the need to purchase separately.
Guest - November 27, 2019
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(20 rated repairs)?
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Nothing special take tube off put nuts on new tube then o-ring , and tighten it back in place simple thank you for having the parts I needed. Planing on other repairs now I know where to get parts.
Unplugged compressor
Removed plastic cover
Removed outlet tube
Replaced outlet tube , and new compression fitting
Put cover back on and ran compressor to test fix
Compressor working great
Did you find this story helpful?
Thank you for voting!
Pressure switch went bad caused it to not shutoff.
Took off shroud around the electric motor and compressor. Removed the pressure switch and outlet tube. Reinstalled with the new parts. Then replaced shroud.
1. Removed the plastic cover.
2. Removed the old outlet tube.
3. Threaded the new outlet tube.
4. Make a test for air leaks.
5. Reattached the plastic cover.
Did you find this story helpful?
Thank you for voting!
Outlet tube broke when the compressor was dropped off a truck.
Removed the plastic housing. Outlet tube was readily accessible. Unscrewed the nuts that attached the tube to the compression unit. Installed new tube. Easy. Cost me about $30 to repair a $350 compressor.
Remove both Wheels to gain access to the shroud around the compressor once both shroud halfs are off the air outlet tube nuts are visible loosen nuts remove tube take notice where the o-ring is located.
Had to remove the top plate which holds the manifold, the part that has the gauges and hose outlets on it. Then I had to remove the outlet tube using a 14 mm wrench. I had to put on the o-ring and nuts making sure they go in the right direction, the compression fitting has to go on a certain way. I then tightened the tube down. Replaced m
... Read moreanifold and replaced the top plate. I did some other things like checked the regulator. Made sure the cutoff was working right.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10186543
Manufacturer Part Number: A16998
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/power-tool/compressor/hoses-and-tubes/"},{"position":2,"name":"A16998","title":"A16998","url":""}]
_WW_1.gif "Part Location Diagram of A16998 DeWALT Outlet Tube")
_WW_1.gif "Part Location Diagram of A16998 DeWALT Outlet Tube")
