This is a genuine Delonghi product. This Gasket is used on many models of Delonghi espresso makers. The Gasket is made of a high temp silicone and is used to create a seal between the diffuser and the filters. If water, steam, or coffee leaks out of the filter while brewing then this part should be replaced. To replace this Gasket first remove the diffuser by removing the screw. Then, gently pull the old gasket off. Clean the area with a damp cloth. Install the new Gasket and reinstall the diffuser.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair
Great condition
Guest - May 8, 2019
Verified Purchase
★★★★★
★★★★★
Life saver
Item was perfect, did not know it was available until I saw it in your site, now I can return to buy with extreme confidence.
Guest - August 24, 2019
Verified Purchase
★★★★★
★★★★★
easy repair
good product easy to manipulate
Guest - October 2, 2019
Verified Purchase
★★★★★
★★★★★
Great part
Awesome, very quickly
Guest - September 8, 2020
Verified Purchase
★★★★★
★★★★★
Just what I needed
Wasn’t sure I’d find parts for my machine. This was a perfect match and arrived quickly. My espresso machine is back to running like new!
Guest - August 14, 2021
Verified Purchase
★★★★★
★★★★★
Perfect
Buying parts Fromm you allow me to save money.After I fix something last for long time like new.Thanks
Hector - March 29, 2022
Verified Purchase
★★★★★
★★★★★
Easy Repair
Arrived quickly, fit perfect
Miguel - June 12, 2022
Verified Purchase
★★★★★
★★★★★
easy repair part fit perfect.Thanks
part ok. thanks
Guest - March 16, 2023
Verified Purchase
★★★★★
★★★★★
Exact part, easy to use parts list.
Fast delivery, thank-you! Easy to do business with.
Guest - May 7, 2023
Verified Purchase
★★★★★
★★★★★
Easy Repair/Shipping Cost High
Even I was able to remove the old gasket and replace it in just a few minutes. The part came quickly and it has worked very well--no leaks when I get my espressos and lattes. The shipping costs seemed a little high, though, almost 2x the cost of the gasket. All in all, I am pleased that I decided to get a replacement part for < $10 instead of paying > $300...
Lew - July 6, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Unplugged machine & made sure there was no water left in the basket
2. Unscrewed and then removed the metal filter from the leaking gasket
3. Used screwdriver to \"wedge\" out the old gasket
4. Put in new gasket and screwed the metal filter back in place
1. remove the base
2. disconnect the water hoses
3. disconnect the electrical wires
4. remove coffee steaming components
5. replace coffee grinds holder gasket
6. put everything back together using pictures to make sure placement was correct on wiring.
The hardest part was reaching three screws which secure the top of the machine. It requires a star drive. All of the other screws are small Phillips heads. After you remove those and two on the back, the top will lift right off.
I promise, everything is very intuitive. Unplug the hoses by simply pulling on them, remove the pu
... Read moremp by wiggling it off its rubber mounts and unscrew the water valve connected to the pump the pump. Replace those with the new ones and reverse the process.
I chose to change a few of the other little pieces of tubing, simply because I was under the covers - super simple and cheap.
I also replaced the spring and valve on the head (where the water comes out) to ensure that the new pump didn\'t overwhelm an old valve.
This pump works perfectly in our Delonghi EC702, it actually is an improvement over the original one. With these parts changed, we have a completely new machine!
Thanks eReplacement for the super fast service and clear parts catalog!
Read less
Did you find this story helpful?
Thank you for voting!
The gasket failed and the water would not flow through the coffee.
1. Unscrewed the center screw.
2. Removed the metal strainer and them removed the gasket in pieces with the spatula.
3. Saved little spring loaded valve until my gasket arrived.
4. Then put the rubber gasket in place and screwed in the valve with the threaded plastic part.
5. Finally attached the metal strainer wit
... Read moreh the screw.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/small-appliance/coffee-maker/seals-and-gaskets/"},{"position":2,"name":"7313285849","title":"7313285849","url":""}]
