1. Flip the espresso machine upside down.
2. Remove the screen from the steamer assembly using a phillips head screwdriver.
3. Remove the brass valve nut with a flat head screwdriver (a penny also works).
4. Remove the valve spring, ring, and valve using the screwdriver to help pull the spring out.
5. Replace the v
... Read morealve spring, ring, and valve and reassemble the machine.
Removed the Philips screw while the Delonghi EC15 coffeemaker was unplugged (they are all designed very similar so it applies to many other Delonghi coffee makers), removed the round mesh, then used a flat screwdriver to remove another screw which secures the spring and spring valve. At this time the spring valve with the spring will come
... Read more out. Simply replaced them and reassembled. It\'s important to not screw in the flat screw all the way in as it affects the flow rate of hot water.
It stopped dripping hot water and now works perfectly.
1. Remove screws where the portafilter goes
2. Remove plate
3. Remove other screwb and had access to old spring and valve
4. Replace new parts
5. Coffee maker kept leaking
6. Clean the circuit with vinegar and water and that stop the leak
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
