This is an authentic Makita replacement part that is OEM sourced to ensure quality. The metal depth guide is intended to be used with circular saws. This item attaches to the foot assembly and is used as a rail that supports the depth adjustment knob. This item is available as an individual replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy replacement of old part.
With just a few tools I replaced the bent guide with the new one and my saw was back to original. Cuts straight and square again.
Guest - August 28, 2019
Verified Purchase
★★★★★
★★★★★
Perfect replacement
Read an earlier review that said don't try to straighten a bent depth guide. So true! This part isn't real expensive, arrived in a couple of days, and it only took a few minutes to swap out the old depth guard which got bent when I knocked the saw off onto a cement floor :-(
Steven - May 11, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
It was easy enough once you realize there is a set screw on the bottom that loosens up the parts
Paul - July 2, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Want to ereplacementparts.com and looked at the nomenclature and printed it to include a full picture and listing of the parts.
2. Removed the blade
3. Remove the Rubber Sleeve so the Safety Cover can be moved and you can free up and remove the Cap Square Neck bolt M8X90. You\'ll need a Hex to remove a screw holding Depth G
... Read moreuide to the Base Complete.
4. Pull out the Cap Square Neck Bolt, observing how this all fits together. If you have a phone, maybe take a picture. If not, line it up so you have the parts in the right order.
5. Repeat in reverse order.
A word of wisdom...if you have this problem...don\'t try and straighten the depth guide. It only costs a few bucks and trying to straighten it will only drive you mad!
1. Used Allen Wrench to remove set screw on base plate to remove holding bolt on the guide
2. Removed the Rubber Sleeve to move the guard out of position.
3. Removed the securing stop ring.
4. Removed the thumb lock.
5. Removed the nut and washer.
6. Pulled out the bolt and replaced the depth guide.
... Read more />7. Reverse procedure.
1.Remove blade
2.Remove guard stop
3.Remove adjustment bolt from depth gauge and hex bolt and remove old depth gauge.
4.Align new gauge and reverse the above order. 3,2,1
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
