This is an authentic replacement part manufactured for use with DeWalt chop saws. The special cordset is a two wire cord and is used to carry electricity into the saws switch and motor. This cordset is available as an individual replacement part, please see model diagram for associative parts.
Troubleshooting
This part works with the following brands:
DeWALT
This part works with the following products:
Chop Saw
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1.vise assembly- Removed the two cap bolts holding broken assembly to base and then slipped new assembly into place and secured it with the original cap bolts.
2. Power cord- removed the torx screws holding handle together and then removed two more torx screws securing power cord to handle. I then removed the torx screw holding t
... Read morehe trigger to the handle. Finally I removed the two screws on the trigger assembly, one for black wire and one for white wire. Cutting the new cords wire ends to the appropriate length. I attached the appropriate ring terminals to the wire ends. I then reversed what I did to disassemble it. Attach wires to trigger, Attach trigger to handle. Secure cable to handle and feed cable appropriately thru handle assembly. Reassemble handle. Test on GFI circuit for proper operation. I needed to get A/C rated ring terminals of the appropriate size because they didn\'t come with the power cord.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10170776
Manufacturer Part Number: 386624-07
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
