This is a genuine OEM sourced replacement part which is specially designed for use with Shindaiwa gas powered handheld lawn and garden equipment. The ignition module also known as armature-magneto provides the current for the ignition system by producing pulses of high voltage for the spark plugs. This high-quality component is sold individually, please note the spark plug boot is sold separately.
FRIST all ordered the parts I need to fix the problem. Like the carborater , coil, spark plug, gaskets needed to repair my weed eater. Not to mention got all the parts i need from E Relacement Parts.com. Machine starts easy and runs a lot better .
1-Removed muffler cover.
2-Removed cylinder cover
3-Removed spark plug cap and coil wire terminal.
4-Removed old coil.
5-Feed coil wire through rubber grommet in engine housing.
6-Install new coil.
7-Set the magnet and coil gap with a business card, if you don\'t have a gauge, card measures close to
... Read more 14 thousandths.
8-Rest of the job is in reverse
1 removed boot from spark plug
2 removed torx screws from cover
3 removed spark plug
4 removed spark plug boot and wire clip
5 removed cover to access coil
6 removed old coil
7 installed new coil using business card to gap between new coil and magneto
8 place boot over new plug wire that came on
... Read morenew coil.pulling wire completely through boot
9 attach wire clip to plug wire end firmly
10 fished wire and clip back through boot (steps 9 and 10 are the most time consuming )
11 replace cover
12 replace plug and install boot on plug
13 pulled recoil rope and it started right up
1. Checked for fire to the spark plug and found none;
2. Used multi-meter to check continuity of old coil to determine it was bad;
3. Removed casings from trimmer;
4. Removed spark plug cap and spring from old coil wire;
5. Pulled spark plug wire through rubber grommet;
6. Removed old coil;
7. Installed
... Read more new coil;
8. Pushed spark plug wire through rubber grommet (a little light oil or silicone makes this easier);
9. Installed spring onto plug wire and slid cap onto plug wire;
10. Installed casings onto trimmer;
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
