This is a special item which is designed for Poulan chainsaws. It is supplied directly from the original equipment manufacturer. The screw is an important component of a bar adjustment mechanism which allows a user to set the tension on the chain. If the original pin is missing or is damaged, this part will provide an identical replacement. Note, this high-quality screw-bar adjust is made of durable metal and is sold as an individual component. A wrench set and a screwdriver will be needed to perform this repair. To ensure the proper replacement procedure, check the appropriate diagrams for your specific model.
Troubleshooting
This part works with the following brands:
Poulan
Craftsman
This part works with the following products:
Chainsaw
Part# 530016265 replaces these:
530016265,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the bar clamp. Then on the back side of it, remove the retainer, bar screw and the bar pin. Thread the new bar pin on the new bar screw and secure them by the inserting the new retainer.
1. Removed chain cover with wrench
2. Removed keeper washer to allow adjuster screw to be removed
3. Installed new pin bar adjuster
4. Reinstalled keeper washer on adjuster screw.
5. Reinstalled chain cover
Removed bent bar and broken chain tension nut . Installed new parts . Adjusted chain tension . Tested by cutting down 2\' diameter tree . No problems .
1. Removed retainer bar adjust
2. Removed screw bar adjust
3. Inserted new screw bar adjust
4. Inserted new pin bar adjust
5. Inserted old retainer bar adjust
6. Installed bar and chain
7. Installed bar clamp and bolts
8. Adjusted chain tension
Did you find this story helpful?
Thank you for voting!
Couldn\'t adjust the bar length (Bar Clamp was cracked)
1) Installed the retainer, screw & pin into the new bar clamp.
2) Removed old bar clamp
3) Installed new bar clamp
4) Adjusted bar (chain tension)
5) Final tighten 2 bolts that hold Bar Clamp & Bar
6) Cut down a tree
Remove the blade retainer(two nuts)
Remove the old screw by pulling the split washer with long nose pliers
Install new tension nut and screw
Install split ring
Reassemble the bar and chain.
Did you find this story helpful?
Thank you for voting!
pin bar adjustment piece broke in half and striped screw.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
