Part Location Diagram of 530069919 Husqvarna Kit Rope 40"
See part C-40 in the diagram
Replacing your Poulan Chainsaw Kit Rope 40"
( Grid squares measure 1x1 inch )

Kit Rope 40" 530069919

Manufactured by:
Husqvarna
ERP Number:
ERP16352781
Part Number:
530069919
Original Equipment Manufacturer ?
  Works with your model  PP380!
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   PP380!

Product Description

?

This rope is a key component of a recoil starter assembly, when the rope is pulled to start the engine, it is returned back into the starter pulley by means of the starter spring. It is a durable nylon starter rope that is sourced directly from original equipment manufacturer for Poulan chainsaws. This high quality 40" rope is sold individually, please note the handle grip and other parts are all sold separately.

Troubleshooting

This part works with the following brands:
  • Poulan
  • Craftsman
  • Husqvarna
This part works with the following products:
  • Chainsaw
Part# 530069919 replaces these:
530069919,

Videos For installing this part.

?
Replacing your Kit Rope 40"

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Rope would not rewind

Robert from Ottsville, Pennsylvania

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
576744401, 530069919, 545008013
1. Placed new spring starter into housing, and sprayed with WD-40
2. Greased shaft and put plastic pulley onto shaft
3. Put other parts into place - the plastic collar, the coil spring and the screw/allen key
4. Pulled string into proper hole in pulley, wrapped the end around the groove in the pulley
5. Put screw i nto place to hold the string
6. Started winding the rope onto the pulley until the spring was tight; then, unwound 1 turn
7. Put the string through the plastic housing and tied a loop in the string so it wouldn\'t all pull through.
8. Pulled the string through the handle and made a knot
9. Untied the loop and let the string go all the way back into the housing until the handle stopped it.
10. Reattached the housing to the chainsaw.
11. Rope pulls back all the way each time.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16352781
Manufacturer Part Number: 530069919
Brand Model Number Description
Husqvarna 330 Chainsaw - Chain Saw
Craftsman 358350980 Chainsaw - Chainsaw
Craftsman 358350981 Chainsaw - Chainsaw
Craftsman 358350982 Chainsaw - Gas Chain Saw
Poulan 380 Chainsaw - Chainsaw
Poulan 967061401 Chainsaw - Gas Chainsaw
Poulan 967061501 Chainsaw - Gas Chainsaw
Poulan PP330 Chainsaw - Chainsaw
Poulan PP380 Chainsaw - 380 Gas Chainsaw
Poulan PP4818A Chainsaw - Chain Saw
Poulan PP5020AV Chainsaw - 2 Stroke Gas Chainsaw
Poulan PR5020-967061501 Chainsaw - Gas Chainsaw