Easy to repair.
1. Removed top cover to saw. (3 Screws)
2. Removed Allen head bolt through the bucking plat to remove silencer bracket.
3. Slid the muffler off the head.
4. Cleaned the area around where the muffler sets and was attached.
5. Installed the square headed bolts, slid the muffler on the bolts, att
... Read moreached the silencer bracket and tightened the nuts until tight.
6. Attached the silencer bracket to the bucking plate and tightened it down.
7. Took it to the woods and promptly cut down a 20\" diameter Ash tree and then an 18 in Ash.
8. Checked all the screws, nuts that had been replaced to make sure they were tight and then cut up both trees into 16\" rounds.
No problems. Easy repair.
Easy to order and quick shipping.
Read less
Did you find this story helpful?
Thank you for voting!
Muffler gasket gone. So replaced nuts and bolts that hold muffler on while doing repair
Removed nuts holding muffler bracket and muffler on. Removed bracket, muffler and square head bolts and damaged gasket. Put all the new parts back on and tightened nuts.
Did you find this story helpful?
Thank you for voting!
Exhaust bracket bolt holes elongated due to nuts vibrating loose and wearing thru metal
1. Removed chain an bar
2. Removed top and side covers
3. Removed muffler, lock nuts, and exhaust bracket
4. Replaced missing exhaust gasket, exhaust bracket and lock nuts
5. Reassembled top cover, chain bar and chain and side cover
Pretty straight forward repair.
Did you find this story helpful?
Thank you for voting!
The pin fell out of the throttlr trigger, and the exhaust bracket broke at the bend.
1. Pull the trigger back until it the holes line up.
2. Push the pin into the hole as far as you can with your finger.
3. Advance the pin with something of similar size until it is centered.
4. Done.
1. Remove the chain cover.
2. Remove the two nuts and one bolt that secure the bracket.
3. Remove
... Read more the broken pieces.
4. Reverse the process to install the new bracket.
5. Done.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9281944
Manufacturer Part Number: 501768801
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Bracket or Flange","title":"Bracket or Flange","url":"/parts/lawn-and-garden/chainsaw/brackets-and-flanges/"},{"position":2,"name":"501768801","title":"501768801","url":""}]
_WW_7.gif "Part Location Diagram of 501768801 Husqvarna Silencer Bracket")
_WW_7.gif "Part Location Diagram of 501768801 Husqvarna Silencer Bracket")
