This is an OEM part sourced directly from the manufacturer. The switch lever is found in Husqvarna chainsaws. This part is made of high-quality plastic, and is used to activate the choke knob to stop the machine in an emergency. You will require a screwdriver when replacing this item. The switch lever is available as an individual replacement part.
Troubleshooting
This part works with the following brands:
Husqvarna
Jonsered
RedMax
Poulan
This part works with the following products:
Chainsaw
Part# 545061701 replaces these:
545061701,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove saw cover. Unscrew the washer holding the switch lever. Remove the worn lever and carefully remove the contact connection from the switch lever. Install the contact connection in the new switch lever and reattach the switch lever. I ordered the new switch spring in case the old spring was worn. Pay attention to how the spring fits
... Read more in it\'s guides. replace the spring after installing the switch as it is kind of a strong spring.
Read less
Did you find this story helpful?
Thank you for voting!
Chainsaw kill switch lever broke./ Install new spikes.
Replace kill switch lever.
1. Removed engine cover
2. Used nut driver to remove switch lever being careful not to brake metal spring with kill wire attached.
3. Installed new switch lever while carefully reinstalling spring with kill wire.
Note: there is no reason to remove carburetor to perform this repair.
... Read more/>Installation of spike
1. Remove clutch cover, bar and chain.
2. Place spikes on area provided on saw.
3. Drive the short screw into one of the holes provided on the saw. Note: one of the screws provided with the part is not correct for my application(Husqvarna 240)! Had to drill the upper hole location with a drill bit no larger than pilot hole and provide my own short screw.
4. Make spike screws snug. Do not over tighten as you can strip the plastic on the saw!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9030693
Manufacturer Part Number: 545061701
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 545061701 Husqvarna Switch Lever")
_WW_1.gif "Part Location Diagram of 545061701 Husqvarna Switch Lever")
