( Grid squares measure 1x1 inch )

9021697-1-S-Husqvarna-537271302-Plate 360 view

Plate 537271302

Manufactured by:: Husqvarna
ERP Number:: ERP9021697
Part Number:: 537271302

Works with your model 461!

$26.88

Delivers in 3-5 Business Days!

Easy

30 - 60 mins

(8 rated repairs) ?

Works with your model 461!

Jump to:

Description Frequently Purchased Together Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

The plate is made out of metal and attaches to the crankcase. It is an original part for Husqvarna and Jonsered chainsaws and is sold individually. This part may become cracked or broken and will need to be replaced. A screwdriver and a socket set may be needed during the installation of this part.

Frequently Purchased Together

Protector

★★★★★

(3)

$8.95

Troubleshooting

This part works with the following brands:

Husqvarna
Jonsered
RedMax

This part works with the following products:

Chainsaw

Part# 537271302 replaces these:

5372713-02, 537271301, 537271302,

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

30 - 60 mins

(8 rated repairs) ?

< Prev
1
Next >

Sort by:

Over time the chain would come off the bar after getting caught on twigs and tore off the bottom of the plate, leaving jagged edges

Walter from Aurora,, Nebraska

6 of 6 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 537271302

I simply removed the bar and chain, knocked the clutch loose as described in the owner\'s manual, exposing the plate. Removed the two screws that held the plate and removed the old plate, cleaned out a few years accumulation of saw dust and oil, and attached the new plate, which fit perfectly. I reversed the removal procedure and that\'s ... Read more

Read less

Did you find this story helpful?

Wear and tear, leaking bar oil, fuel lined cracked and running lean,

ROBERT from MACEDON, New York

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Pliers, Screw drivers, Socket set, Wrench set
Parts Used:: 591375201, 537291604, 585514001, 537042408, 537271302, 537042402

Watched u-tube videos for each individual repair

Did you find this story helpful?

Chain Plate worn out.

George from Derry, New Hampshire

1 person found this instruction helpful.

Difficulty Level:: Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 537271302

The chain sprocket cover must be removed and the Clutch assembly. A special Tool is required to remove the Clutch, I made one. You can also purchase a Piston stop tool \" I made One\" or a piece of Rope to keep the Crankshaft from Turning in order to remove the Clutch. The Rope can be fed into the Spark plug hole until enough Rope stops ... Read more

Read less

Did you find this story helpful?

The plate was damaged

Gregory from Necedah, Wisconsin

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 537089001, 537271302, 503910671

1) Remove the clutch cover, clutch ,drum and plate.
2) Cleaned dirt out.
3) Replaced a new plate and 2 new parts.
4) Reassembled the clutch drum, clutch and cover,

Did you find this story helpful?

Chain brake handle wore out need new clutch hub

Loren from Owatonna, Minnesota

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set
Parts Used:: 537291604, 537271302, 537284301, 503910671

Remove the cover that hold bar and chain on take the fasteners that hold on chain brake handle on each side of housing. Reverse process to assemble. Clutch drum use clutch removal tool take off clutch and remove hub then reverse process to assemble

Did you find this story helpful?

Chain was snagging in the metal plate behind the the sprocket

FRANCIS from CHICAGO, Illinois

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 537271302

Removed the housing cover, removed the bar and chain, removed the sprocket/drive wheel and unscrewed old metal plate that covers the bar oil pump mechanism. Screwed on the new plate cleaning all as I went and installed the sprocket,bar and chain, and the covering plastic case.

Did you find this story helpful?

No oil getting to the bar. Damage to plate due to chain throw off. Oil tube seal hard.

Danny from Walnut Cove, North Carolina

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 537271302, 537261501, 503910671

Remove bar and chain. Remove clutch, sprocket,oil pump drive gear. Remove plate and oil tube. Reverse assembly.

Did you find this story helpful?

The chain had been digging into the plate under the clutch. I had been using a .050 chain with a .058 bar. That could of been why the chain was hitting the plate.

David from Lincoln, Montana

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 537271302

Once I get the proper bar for my chain, I will take the spark plug out, insert a rope, hit the clutch to loosen taking it off along with the sprocket. Then I will take out the screw that holds down the plate, and then replace the plate with the new one.

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP9021697
Manufacturer Part Number: 537271302

Brand	Model Number	Description
Husqvarna	132R	Brush Cutter - 132 R (19904400001-19920100000)
Husqvarna	455	Chainsaw - Chainsaw
Husqvarna	455E	Chainsaw - Chainsaw
Husqvarna	455ERANCHER	Chainsaw - Husqvarna Chainsaw Model 455ERANCHER Parts
Husqvarna	455ERANCHERII	Chainsaw - Husqvarna Chainsaw Model 455ERANCHERII/2012-06 (455ERANCHERII/201206, 455ERANCHERII/2012 06) Parts
Husqvarna	455ERANCHERIITRIOBRAKE	Chainsaw - Husqvarna Chainsaw Model 455ERANCHERIITRIOBRAKE/2012-10 (455ERANCHERIITRIOBRAKE/201210, 455ERANCHERIITRIOBRAKE/2012 10) Parts
Husqvarna	455ERANCHERTRIOBRAKE	Chainsaw - Chainsaw
Husqvarna	455ETRIOBRAKE	Chainsaw - Husqvarna Chainsaw Model 455ETRIOBRAKE/2013-01 (455ETRIOBRAKE/201301, 455ETRIOBRAKE/2013 01) Parts
Husqvarna	455RANCHER	Chainsaw - Husqvarna Chainsaw Model 455RANCHER/2004-10 (455RANCHER/200410, 455RANCHER/2004 10) Parts
Husqvarna	455RANCHERII	Chainsaw - Husqvarna Chainsaw Model 455RANCHERII Parts
Husqvarna	460	Chainsaw - Rancher Chainsaw
Husqvarna	461	Chainsaw - Husqvarna Chainsaw Model 461 Parts
Husqvarna	965030298	Chainsaw - Gas Chainsaw
Jonsered	CS2255	Chainsaw - Chain Saw
RedMax	GZ550	Chainsaw - Chain Saws