This oil hose is supplied directly from the original equipment manufacturer. The Husqvarna component is made for use with many chainsaws. This plastic hose is fastened to the cylinder in the oil pump assembly, providing oil for the chainsaw motor. A screwdriver and a socket set are necessary for making the replacement. It is recommended to refer to engine manual and diagrams for further instruction. The oil hose is sold individually.
Remove side cover
Remove bar and chain
Remove clutch assembly
Remove metal cover
Remove lower bolts for the handle
Clean and blow off all areas
Remove outer oil line
Remove oil pump screw and oil pump
Reach in from the bottom of saw moving handle off to the side and pull out inner tank lin
... Read moree and filter
Remove filter from old line and install on new line
assemble in reverse order
First empty oil from reservoir. Disengage clutch top bar so one can remove cover. Remove 2 nuts that hold cover on. Remove cover. Remove chain and bar. Remove spark plug. Screw in piston stop. Place clutch removal socket on ratchet. Rotate clockwise to remove then spin off clutch don\\\'t lose needle bearing on clutch shaft. Use Alle
... Read moren wrench to remove 1 screw that holds on pump. Remove hose if you want to replace hose to reservoir. Remember carrying handle and flip over saw and use pliers to grab hose and remove from base of reservoir. Reverse process to install necessary parts. Time needed. 45 minutes
I took a old 1/2 socket brought it to the grinding wheel. Made the tool to take the clutch off, It took a couple of times at the grinder for a good fit on the clutch. Use the 1/2 inch socket you get more leverage. Replaced both oil hoses, After 10 years they were a little worn. Both oil hoses fit perfectly.Husky 455 up and running cool.
... Read moreWill buy from you guys again.
Drain oil, remove clutch,oil pump to replace 1st oil hose. Remove bottom shell to replace oil hose coming from the oil tank.This repair was for a Husqvarna 460 rancher very easy to fix.There is lot of videos on YouTube on how to repair chainsaws.Replacement parts.com has the best prices for do it your self repairs so you wont have to take
... Read more to a repair shop and they will charge you hundreds of dollars.
Replaced both the oil line from the reservoir to the pump and the oil line from the pump to the bar, the pinion gear, oil pump and put loctite 518 on all connections. That stopped the leaking.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/chainsaw/hoses-and-tubes/"},{"position":2,"name":"537261501","title":"537261501","url":""}]
_WW_4.gif "Part Location Diagram of 537261501 Husqvarna Oil Hose")
_WW_4.gif "Part Location Diagram of 537261501 Husqvarna Oil Hose")
