Part Location Diagram of 505310751 Husqvarna Impulse Pipe
See part C-505 31 07-51 in the diagram
( Grid squares measure 1x1 inch )

Impulse Pipe 505310751

Manufactured by:
Husqvarna
ERP Number:
ERP8993584
Part Number:
505310751
Original Equipment Manufacturer ?
  Works with your model  36!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?
  Works with your model   36!

Product Description

?

This part is an OEM sourced directly from the manufacturer. It is intended to be used in chainsaws and brushcutters made by Husqvarna and Jonsered. The impulse pipe attaches to the bulkhead assembly next to the intake sleeve. This is a small rubber part and will need to be replaced if it becomes lost. The pipe is available as an individual replacement.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Husqvarna
  • Jonsered
  • Poulan
This part works with the following products:
  • Chainsaw
  • Brush Cutter
  • Trimmer
Part# 505310751 replaces these:
505310751,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bulkhead screw anchor point stripped.

C from LIZELLA, Georgia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
505310751, 503764801
Removed the top cover and the air filter. Removed the carburetor. Removed the bulkhead from the crankcase. Replaced the bulkhead. Reassembled.
Did you find this story helpful?
Thank you for voting!

bulkhead stripped out so carb gasket was leaking air causing lean condition

Robert from Russellville, Arkansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
530029814, 505310751, 503764801
removed carb cover then removed air filter carb bolts and bulkhead bolts removed trigger linkage and choke linkage removed gas line impulse pipe and sleeve reinstalled in reverse order
Did you find this story helpful?
Thank you for voting!

Bulkhead was stripped out, which prevented carb being properly tightened

James from Canyon Country, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
505310751, 503764801
Removed air filter, carb w/ choke and throttle linkage. Next removed the three 4mm cap bolts securing existing bulkhead. Used a #12x2ö sheet metal screw to remove impulse pipe from cylinder base. Installed new impulse pipe into cylinder, and installed new bulkhead with the three cap bolts.reinstalled carb gasket, carb, air filter base and linkage for choke and throttle. Installed air filter, reconnected fuel line, and reinstalled top cover on saw. Repair time approximately 45min start to finish. Work done on a Husqvarna 55.
Did you find this story helpful?
Thank you for voting!

saw ran poorly rebuilt carbuerator

Daryl from REPUBLIC, Michigan

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
disassembled the saw , removed carb , reassembled saw
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8993584
Manufacturer Part Number: 505310751
Brand Model Number Description
Jonsered 2036 Chainsaw - Chain Saw
Jonsered 2040 Chainsaw - Chain Saw
Jonsered 2041 Chainsaw - Chain Saw
Jonsered 2045 Chainsaw - Chain Saw
Jonsered 2050 Chainsaw - Chain Saw
Jonsered 2051 Chainsaw - Chain Saw
Jonsered 2054 Chainsaw - Chain Saw
Jonsered 2054EPA Chainsaw - Chain Saw
Jonsered 2055 Chainsaw - Chain Saw
Husqvarna 240 Brush Cutter - 240, 20010100001-Current
Husqvarna 240EPA Brush Cutter - Brushcutter
Husqvarna 240F Brush Cutter - Brushcutter
Husqvarna 240R Brush Cutter - Brushcutter
Husqvarna 240REPA Brush Cutter - Brushcutter
Husqvarna 245 Brush Cutter - Brushcutter
Husqvarna 245EPA Brush Cutter - Brushcutter
Husqvarna 245R Brush Cutter - Brushcutter
Husqvarna 245REPA Brush Cutter - Brushcutter
Husqvarna 245RX Brush Cutter - Brushcutter
Husqvarna 245RXEPA Brush Cutter - Brushcutter
Husqvarna 36 Chainsaw - Chainsaw
Husqvarna 365 Chainsaw - 365
Husqvarna 39R Trimmer - Husqvarna String Trimmer Model 39R/1986-01 (39R/198601, 39R/1986 01) Parts
Husqvarna 40 Chainsaw - Chainsaw
Husqvarna 41 Chainsaw - Chainsaw
Husqvarna 45 Chainsaw - Chainsaw
Husqvarna 45EPA Chainsaw - Chainsaw
Husqvarna 49 Chainsaw - Chainsaw
Husqvarna 49EPA Chainsaw - Chainsaw
Husqvarna 50 Chainsaw - Chainsaw