This item has been sourced from the original manufacturer to be used with chainsaws and brushcutters from Husqvarna and Jonsered. The metal recoil spring is part of the starter assembly and is used to pull the starter rope back after it is pulled to start the motor. This spring is priced as a single item.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Worked as expected
Chain saw is back to work
Guest - February 22, 2020
Verified Purchase
★★★★★
★★★★★
Chainsaw part
Easy shopping, easy shipping, came fast. Exact part I needed
Guest - October 17, 2022
Verified Purchase
★★★★★
★★★★★
Replacement parts for a old husqvana chain saw were prefect!
Easy to find parts on website part fit perfectly and worked fine would recommend everyone use ereplacementparts.
Scott Jestings - December 6, 2022
Verified Purchase
★★★★★
★★★★★
The recoil spring totally solved my problem
This part is exactly what I needed and fit perfectly. I order from replacement partly because I’m a kind of a do it yourself guy and because I try to save money where I can. This part so perfectly it made my job not only easier but successful
Guest - May 28, 2025
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Set spring in place/installed rope in pulley/installed into spring and fastened. Wound pulley one rotation short of tight/fed rope threw housing into rubber handle and tied it off. Allowed pulley to unwind. Installed housing back onto saw
1. Removed housing for recoil starter.
2. Used hex wrench to remove rope piles.
3. Lifted out broken recoil spring and placed new recoil spring.
4. Replaced rope pulley and tightened hex screw that retains the pulley.
5. Rewound starter rope onto pulley and then tightened pulley one full turn while looping starter
... Read moreone final time.
6. Replaced recoil starter onto chainsaw and tightened the four retaining screws.
7. Varoom. Saw starts just like new.
Read less
Did you find this story helpful?
Thank you for voting!
Starter rope was hard to pull and when it did come out it wouldn\'t retract.
Removed top cover. Then remove the worn parts. Removed the rope from the hand grip .Put the new pulley in place then the spring, put the rope in the pulley. Then wound the pulley and spring until I thought It was tight enough. Put the rope thru the housing and attached it to the hand grip. Tightened down cover and let the rope go slowly i
... Read moren
Read less
Did you find this story helpful?
Thank you for voting!
Fixed end of starter recoil spring was broken causing starter cord to not retract.
Removed starter recoil cord housing from side of chainsaw. Removed screw holding starter rope wheel to housing. Saw defect in spring. R&R spring, lubed contact surfaces and reassembled.
Removed four screws securing the case.
Removed Allen head screw to remove rope pull assembly.
Replaced the parts and wrapped the new rope around the pulley.
Threaded the rope through the eyelet on the case and wound the spring a couple more turns before inserting the rope through the handle and tying a knot. Replaced
... Read morethe case and four screws.
Works perfect.
1. I removed the old housing.2. I removed the pulley and coil spring.2. I threaded the rope and attached the handle. 3. Then I installed the new coil spring and inserted the pulley 4. Finally attached the housing.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/parts/lawn-and-garden/chainsaw/springs-and-shock-absorbers/"},{"position":2,"name":"501763101","title":"501763101","url":""}]
_WW_13.gif "Part Location Diagram of 501763101 Husqvarna Recoil Spring")
_WW_13.gif "Part Location Diagram of 501763101 Husqvarna Recoil Spring")
