It is an authentic component which is supplied by the original equipment manufacturer for use with Husqvarna, Poulan and Jonsered chainsaws. This is a special protection plate that covers the chain adjuster to keep dust and other debris away. It is made of durable metal and is sold as an individual component. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wrench set will be needed to perform this repair.
Troubleshooting
This part works with the following brands:
Husqvarna
Jonsered
Poulan
This part works with the following products:
Chainsaw
Part# 501814801 replaces these:
501814801,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replaced oil line after removing oil ump. Adjusted oil pump for good wheel contact. Replaced chain guide. Replaced chain adjustment screw, pin, and washer. Replaced chain guard that protects oil pump housing. Older obsolete Husky 266 XP chainsaw is a great mid-power saw. Hated to buy a newer model when this one serves me well with a f
... Read moreew repairs, it is almost like new again. The parts I received worked as supposed to..fit was correct. There is no special instructions, just straight forward take apart and replace. If you need, take pictures as you disassemble...then you can have reference if no repair book is at hand.
Thanks
Removed Bar and Chain from saw. Installed Tensioner and Guide and Protection plates. Replaced the Bar and Chain adjusted chain and saw was ready to put back to work. Parts fit perfectly just like original.
Did you find this story helpful?
Thank you for voting!
Professional repairman (I say in jest) had lost the chain tensioner, protection plate, and broken anti vibe element, so I decided to fix it, along with installing new ring and honing out jug.
1. Removed jug and looked for deep scratches in jug and on outside of piston. There were none.
2. Lightly honed out jug and used very fine emery cloth to smooth piston.
3. Removed ring and cleaned groove.
4. Used regular 2-3\" pipe clamp as ring squeezer and slid piston back into jug. Torqued it down.
5. Reinstall
... Read moreed everything I had taken out to get jug off.
6. Installed new air valve I had also received from replacement parts.
7. Installed antivibe element.
8. Put it all back together, installing chain tensioner and protection plate as I went.
9. Took a while to get the high and low idles in the proper place, but once I did, the old Husqvarna 266 xp ran and cut large logs like it was new again.
1. Remove both filler pieces with a small flat head screwdriver.
2. Use a small diameter punch to drive out the throttle pin, carefully remove it from the other side.
3. Once the pin is removed, lift the throttle lever from the rear. The spring will lift out with the lever.
4. Remove the spring and place it onto the new
... Read morelever. Note itÆs position on the old lever for reference.
5. Install new lever and spring by tilting the head of the lever down into the handle, while the lever is in this position guide the spring down inside the handle.
6 install guide pin into its original position, and check that it functions properly.
7. Re-install filler pieces.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8985358
Manufacturer Part Number: 501814801
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Bracket or Flange","title":"Bracket or Flange","url":"/parts/lawn-and-garden/chainsaw/brackets-and-flanges/"},{"position":2,"name":"501814801","title":"501814801","url":""}]
_WW_4.gif "Part Location Diagram of 501814801 Husqvarna Chainsaw Protection Plate")
_WW_4.gif "Part Location Diagram of 501814801 Husqvarna Chainsaw Protection Plate")
