This is a genuine Echo replacement part, it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.
Remove spark plug
Insert plug stop or heavy string
Bring piston to TDC
Remove side cover
Remove chain and bar
Use hammer and flat screwdriver to remove clutch \" remember it is threaded opposite than normal \"
Remove drum and old bearing
.............
Reverse steps to reassemble
... Read more/>To replace the air filter, simply remove the air filter cover. Remove old filter the install new one
1. Remove air filter cover with screwdriver.
2. Remove air filter.
3. Remove vent tubes to carb from purge bulb.
4. Using long nose pliers, squeeze clips together that hold bulb to chain saw chassis.
5. Remove bulb and replace with new vent tubes installed, connect to tubes to carb.
6. Install new air filter
... Read moreand cover.
7. Test purge bulb.
Replaced carburetor, wish is came with a gasket to the base. Had to take it back off and put a little sealer on it to get it to idle right. Also put new air cleaner on.
Did you find this story helpful?
Thank you for voting!
Starter handle was missing, saw handle cushion was broken, needed new air filter
1,Threaded rope thru new handle, tied knot, loaded spring, done.
2.Removed saw handle, removed starter cover, removed old broken cushion mount and replaced with new one and reinstalled handle and starter cover.
3, Unscrewed carburetor air filter cover and placed new air filter on carburetor and replaced cover.
4, Starte
... Read mored saw, runs great .
Replaced air filter, fuel filter and spark plug. Had a flange nut that was missing so I replaced that as well. After this tune up the chain saw worked extremely well, pretty much like new. Took all of 10 minutes.
Figured out that the tool that you get to remove paint can tops is perfect for fishing out the fuel filter.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8860965
Manufacturer Part Number: 13031039132
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_8.gif "Part Location Diagram of 13031039132 Echo Air Filter")
_WW_8.gif "Part Location Diagram of 13031039132 Echo Air Filter")
