eReplacementParts is proud to be the Preferred Partner of dozens of leading equipment brands that build the gear you love. That means our inventory and availability are unmatched, and in some cases, we are the exclusive parts providers for these brands for their OEM parts programs.
Bissell Parts
We sell only genuine Bissell ® parts.
OR
Popular Bissell Product Types
See AllPopular Bissell Parts
- Manufacturer Part Number:
- B-555-9113
This authentic OEM retainer assembly secures the left and right pivot arms of the brush roll assembly on your steam vacuum. The pivot arms allow the brushes to move and adjust to various surfaces for effective cleaning, and the retainer assembly ensures they stay in place during operation. The assembly comes with the necessary hardware for replacement and is typically located on the sides of the f...
- Manufacturer Part Number:
- B-32074
Genuine Bissell replacement belts used on Vacuums. This is the Pack of Two (2) belts. Belts tend to stretch over time, so it is recommended to change them at least every 6 months for optimum performance.
- Manufacturer Part Number:
- B-203-8161
Genuine Bissell replacement part, this item is sold individually. This Filter is a Pre-Filter, which means it will pick larger debris that the Vacuums pick up before it enters the main Filter. The main Filter will pick up the smaller particles and debris. The B-203-1192 Foam Filter can be washed with water and then left to dry before using it again. Do not use soap when washing this Filter, use water only.
- Manufacturer Part Number:
- B-203-1223
The release lever attaches to the top cover and is used to put the vacuum cleaner in different positions. This part is available individually and is a genuine replacement part sourced from the original manufacturer for use with Bissell bagless upright vacuums. It is made out of plastic and will require replacing if it breaks. While replacing this part a screwdriver may be needed.
- Manufacturer Part Number:
- B-203-1215
This part comes directly from the manufacturer. The Lever Filter is used in many models of Bissell vacuum cleaners. This Filter fits into Lock N Seal Lever (part number B-203-1190) and is used to filter out any large particles before the motor. This Filter is made of a flexible foam. This Filter should be replaced if it becomes torn or lost. To replace this part the Dirt Cup (B-203-2453) and the F...
- Manufacturer Part Number:
- B-203-6679
The autoload gasket is made out of rubber and attaches to the tank. This part is available as an individual replacement. This authentic item is supplied directly from the original equipment manufacturer for use with carpet cleaners by Bissell. No tools should be needed during the replacement of this part. It may become broken and will need to be replaced.
- Manufacturer Part Number:
- B-203-6688
This is a Genuine Bissell geared Motor belt, it is sold individually. When replacing Left Belt it is recommended to replace the Right Belt part #B-203-6804 as well for best operation. The belts on vacuum should be checked periodically. If belts are worn or stretched they need to be replaced to avoid potential damage to the unit.
- Manufacturer Part Number:
- B-203-7470
- Manufacturer Part Number:
- B-32076
This high quality replacement exhaust HEPA filter is specially designed for Bissell vacuums. It is an authentic OEM sourced item, not an aftermarket imitation. Its purpose is to remove dust and other contaminants from the air that exits the unit. Please note, this pleated paper filter is sold individually. No tools needed to replace this filter. • Remove the filter grille • Take out the ol...
- Manufacturer Part Number:
- B-203-8413
This is an authentic Bissell replacement part made for use with a steam mop. This is the cap and the insert assembly for the water tank. It is a specially designed item that will allow steam mop to access water in the tank. These items are made out of plastic material.
- Manufacturer Part Number:
- B-203-5014
This is an original Bissell part. This part is used on many models of Bissell carpet cleaners. The Cap And Insert Assembly is used on the Clean Tank Assembly. The Cap allows for easy flow of clean water and cleaning solution. This part should be replaced if it leaks or becomes damaged in other ways. This part requires no tools to replace.
- Manufacturer Part Number:
- B-203-1015
This is a Genuine OEM replacement part designed for use with Bissell Vacuums. This part is made out of Plastic. It consists of a Bracket/Roller and Plastic Wheels. Please note, Brushroll Assembly is Sold Separately. When replacing this part you will need to remove an Access Plate using a Screwdriver. Snap the roller into place, attach Brushroll Assembly and connect the belt to the spindle that turns the belt.
Popular Bissell Models
-
Bissell 6800
-
Bissell 2300
-
Bissell 1632 (1995)
-
Bissell 1632
-
Bissell 1200
-
Bissell 1200 (SpotBot)
-
Bissell 3107
-
Bissell 2750
-
Bissell 3540
-
Bissell 2800
-
Bissell 2500
-
Bissell 2500 (1995)
-
Bissell 2000
-
Bissell 6221
-
Bissell 6930
-
Bissell 2475
All Bissell Product Types
-
Bissell Canister Vacuum Parts
-
Bissell Carpet Cleaner Parts
-
Bissell Hand Vacuum Parts
-
Bissell Steamer Parts
-
Bissell Upright Vacuum Parts
✖