It is an authentic OEM sourced part which is specially made for Broan and Nutone exhaust fans. This is an identical replacement for a faulty or a missing component that was installed on a new unit. The reflector helps to disperse the light. Refer to the appropriate diagrams for your model to ensure the correct replacement of this part. A screwdriver will be needed to perform this repair. This high-quality screw is made of durable material and is sold as an individual item.
Troubleshooting
This part works with the following brands:
Nutone
This part works with the following products:
Bath & Ventilation Fan
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(3 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
When replacing the fan motor I noticed that the wires of the socket had frayed badly (20 years old). Jumped online - found eReplacement Parts and ordered.
Was quite simple actually the reflector and socket came together but needed to be secured one to the other - snapped the socket into place and re-installed in the fan assembly by tightening the wing nut.
Did you find this story helpful?
Thank you for voting!
When I moved into my house the cover and light was not
I found this site had all the products I needed no where else could I find the parts put the reflector and socket together then added it to the cover tighted a nut and bam I had light
Did you find this story helpful?
Thank you for voting!
Fan Motor Burned Out/Reflector Dull, Grill Filthy & Cracked, Lens Had Yellowed & Melted Some
1. Removed grill & lens assembly.
2. Removed reflector & socket.
3. Removed power unit assembly.
4. 1st Installed power unit back Into ceiling.
5. Assembled reflector & socket together & installed onto power unit assembly housing. After attaching reflector to grille. It is the reflector that secures the grille In p
... Read morelace.
6. Attach lens to grille is last step. It is quite easy to install. Just recall each step as you are removing each piece. Very Easy!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10432162
Manufacturer Part Number: S89765000
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
