1. Removed blade and with then removed upper wheel from axel using 3/4\" wrench.
2. Removed screws and took off upper housing exposing the tensioning plate and leveling hinge.
3. Removed the tensioning plate system sliding upward in the slots on the cast iron post.
4. Backed out tension rod from square nut and removed
... Read morerod and spring.
5. Using punch and hammer drive the hinge pin out of the tension plate paying attention to direction. Hinge pin is seated into the tension plate on one side.
6. Remove axle.
7. Reassemble using new parts paying attention to the orientation slot at the base of the axle.
8. Reinstall tension plate into the cast iron post.
9. Replace upper housing.
10. Replace upper wheel and reinstall blade according to manual.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
