Part Location Diagram of 904070105572 Delta Fibre Washer
See part 34 in the diagram
( Grid squares measure 1x1 inch )

Fibre Washer 904070105572

Manufactured by:
Delta
ERP Number:
ERP10328296
Part Number:
904070105572
Original Equipment Manufacturer ?
  Works with your model  31-252!
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   31-252!

Product Description

?

It is a genuine OEM item that is made for Delta band saws. This is a special hardware which helps to provide a tight fit between connected parts. Over time it may wear out or get damaged eventually requiring a replacement. Check the appropriate diagrams for your specific model to ensure the exact location and application of this washer. It is made of durable material and is sold as an individual item.

Troubleshooting

This part works with the following brands:
  • Delta
This part works with the following products:
  • Band Saw
  • Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

old red fiber washer disintegrated.

Richard from Levittown, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
904070105572
Released the tension on the compression spring, unscrewed the assembly, replaced the
red fiber washer, reinserted the assembly and checked for accuracy. 5 minutes-done.
Fingers only-no tools required. Could not have been easier.
Did you find this story helpful?
Thank you for voting!

Hinge was out of shape(bent).

mike from topeka, Kansas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
1. Remove flywheel
2. Pull adjustment pin on the back
3. Pull shaft out removing the hinge.
4. Replace new hinge
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10328296
Manufacturer Part Number: 904070105572
Brand Model Number Description
Delta 28-141 Band Saw - Band Saw
Delta 28-200 Band Saw - Band Saw
Delta 28-203 Band Saw - Band Saw
Delta 28-203-BDK Saw - Saw
Delta 28-205 Band Saw - Band Saw
Delta 28-205-BDK Saw - Saw
Delta 28-207 Band Saw - Band Saw
Delta 28-207-BDK Saw - Saw
Delta 28-209 Band Saw - Band Saw
Delta 28-209-BDK Saw - Saw
Delta 28-216 Band Saw - 14&#34 Band Saw
Delta 28-216-BDK Saw - Saw
Delta 28-230 Band Saw - Band Saw
Delta 28-230-BDK Saw - Saw
Delta 28-240 Band Saw - Band Saw
Delta 28-240-BDK Saw - Saw
Delta 28-241 Band Saw - 14&#34 Band Saw
Delta 28-241-BDK Saw - Saw
Delta 28-243 Band Saw - Band Saw
Delta 28-245 Band Saw - Band Saw
Delta 28-248 Band Saw - Band Saw
Delta 28-248F Band Saw - Band Saw
Delta 28-248G Band Saw - 14&#34 Band Saw
Delta 28-254 Band Saw - 14&#34 Band Saw
Delta 28-255 Band Saw - Band Saw
Delta 28-262 Band Saw - 14&#34 Band Saw
Delta 28-263 Band Saw - 14&#34 Band Saw
Delta 28-269 Band Saw - Band Saw
Delta 28-270 Band Saw - Band Saw
Delta 28-275 Band Saw - Band Saw