Jenn-Air Washer Dryer Combo Parts
We sell only genuine OEM Jenn-Air ® parts.
Top Jenn-Air Washer Dryer Combo Models
See All ModelsPopular Jenn-Air Washer Dryer Combo Parts
- Manufacturer Part Number:
- 306508
This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
- Manufacturer Part Number:
- 12001541
This drum support roller includes one drum roller and two bearings. Most dryers use two drum rollers, and it is recommended to change both at once.
- Manufacturer Part Number:
- Y303836
This blower wheel comes with a metallic hub clamp to hold it firmly in place.
- Manufacturer Part Number:
- WP303396
This high limit/safety thermostat is used on many of Maytag's brands of gas and electric clothes dryers. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 200 degrees Fahrenheit. The element will kick back in when the temperature drops to 170 degrees Fahrenheit.
- Manufacturer Part Number:
- WP312535
This roller shaft washer is just under an inch in diameter and is used for some of Whirlpool's brands of clothes dryers.Sold individually.
- Manufacturer Part Number:
- 12112425
This kit includes both the drive belt and the pump belt which are both "V" shaped.
- Manufacturer Part Number:
- WP314820
This front or rear dryer drum felt seal is seventy-nine and a half inches long.
- Manufacturer Part Number:
- WPY312959
At 100 inches in length, this dryer drum belt is 3/8 of an inch wide and has five ridges. This belt is all black in color and is made entirely of rubber.
- Manufacturer Part Number:
- WP6-3037050
This part is used to help the belt to rotate the drum. It is white and made of plastic with a metallic bearing in the center.
- Manufacturer Part Number:
- WPY312527
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
- Manufacturer Part Number:
- WP213015
This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.
- Manufacturer Part Number:
- WP216201
This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.