Install
videos!

10122833-1-M-Milwaukee-22-64-3430-Power Cord

( Grid squares measure 1x1 inch )

10122833-1-S-Milwaukee-22-64-3430-Power Cord

10122833-2-S-Milwaukee-22-64-3430-Power Cord

10122833-1-S-Milwaukee-22-64-3430-Power Cord 360 view

Replacing your Milwaukee Angle Grinder Power Cord

Power Cord 22-64-3430

Manufactured by:: Milwaukee
ERP Number:: ERP10122833
Part Number:: 22-64-3430

$24.10

Delivers in 3-5 Business Days!

Easy

Less than 15 mins

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Description Frequently Purchased Together Troubleshooting Repair Videos Repair Instructions Model Cross Reference

Product Description

This is a Genuine Manufacturer Approved replacement part designed for some Milwaukee Power Tools. This item is sold individually. Due to the use or other factors a cord can crack or get damaged otherwise. It is important to replace a damaged cord before continuing to use a Power Tool. Please note Cord Protector/Sleeve is Sold Separately.

Frequently Purchased Together

Carbon Brush Set

★★★★★

(4)

$14.35

Troubleshooting

This part works with the following brands:

Milwaukee

This part works with the following products:

Angle Grinder

Videos For installing this part.

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

Less than 15 mins

(4 rated repairs) ?

< Prev
1
Next >

Sort by:

Cut cord to grinder

T. from Mears, Virginia

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 22-64-3430

Removed the old cord and replaced.

Did you find this story helpful?

Power cord had cut in it.

Wayne from Dearborn, Missouri

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 44-76-0095, 22-64-3430

Removed the rear housing and noted where all of the parts were located. Disconnected the cord from the switch .Slid the cord protector on the new cord. Connected the new cord to the switch. Made sure all the parts were in their place and screwed the housing together.

Did you find this story helpful?

Worn out pads on palm sanders, bad cords on angle grinders

Sean from Kent, Washington

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers
Parts Used:: 158324-9, 44-76-0210, 44-76-0095, 22-64-3430, 22-64-0565, 039066005051

Took screws out of sander pads and replaced. Removed cut cords from angle grinders installed new cords with protectors.

Did you find this story helpful?

Needed a new cord and relief

matthew from oakland, California

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers
Parts Used:: 44-76-0095, 22-64-3430

Remove the rear housing of the grinder. And make a wiring diagram and take a few picture of where the parts inside are located, especially the springs. Remove the cord from the switch. Slide the new cord relief onto the new cord. If want to use terminals on the cord you can get those locally, the cord does not come with them. Attach the c ... Read more

Read less

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP10122833
Manufacturer Part Number: 22-64-3430

Brand	Model Number	Description
Milwaukee	6117-30	Angle Grinder - 5" HP Angle Grinder With Paddle Switch
Milwaukee	6117-31	Angle Grinder - 5" HP Angle Grinder With Paddle Switch
Milwaukee	6117-31B	Angle Grinder - 6117-31b (C93a) 5 Hp Angle Grinder With Paddle Switch And Brake Parts
Milwaukee	6117-33	Angle Grinder - 5" HP Angle Grinder With Slide Switch
Milwaukee	6117-33D	Angle Grinder - 5" HP Angle Grinder With Slide Switch
Milwaukee	6146-30	Angle Grinder - 4.5" Compact Angle Grinder
Milwaukee	6146-31	Angle Grinder - 4.5" Compact Angle Grinder With Paddle Switch
Milwaukee	6146-33	Angle Grinder - 4.5" Compact Angle Grinder With Slide Switch
Milwaukee	6147-30	Angle Grinder - 4.5" Compact Angle Grinder With Paddle Switch
Milwaukee	6147-31	Angle Grinder - 4.5" Compact Angle Grinder With Paddle Switch
Milwaukee	6161-30	Angle Grinder - 6" HP Angle Grinder With Paddle Switch
Milwaukee	6161-31	Angle Grinder - 6" HP Angle Grinder With Paddle Switch
Milwaukee	6161-33	Angle Grinder - 6" HP Angle Grinder With Slide Switch