1) Remove plastic cover from head
2) Remove four screws
3) Remove top cover
4) Put o-ring on pin and insert through hole
5) Put spring over pin (from top side )
6) Press cap onto pin
7) Reassemble
The button pressed to lock the wheel broke off, making the grinder unusable, (without button and spring the wheel lock could engage while grinder wheel was spinning, making it dangerous and unusable
1. Made sure the pin on grinder wasnÆt in the depressed position that locked wheel.
2. Then placed spring and pin cap over pin.
3. After checking spring and pin cap aligned over pin I pressed with thumb to snap button over metal stub.
4. I wasnÆt able to snap in place.
5. Used a slotted screw driver over pin ca
... Read morep and tapped it lightly with a hammer, that snapped it in place.
6. Confirmed that grinder worked correctly by only locking wheel when pressed.
7. Done.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Spring or Shock Absorber","title":"Spring or Shock Absorber","url":"/parts/power-tool/angle-grinder/springs-and-shock-absorbers/"},{"position":2,"name":"233072-2","title":"233072-2","url":""}]
