OEM Simplicity Snow Blower Parts & Accessories

Washer-lock 5/16 – Part Number: 936-0119

$6.42

Minimum Quantity of 2 required

Manufacturer Part Number:: 936-0119

This is an authentic replacement part for use with outdoor power equipment. This versatile metal lock washer has many applications for use with products like tillers, snowthrowers, and lawnmowers. The washer is sold individually, please see model diagram for part usage.

Snow Blower Shear Pin

★★★★★

(1)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 703063

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Plea...

Lawn Mower Wing Knob

★★★★★

(13)

$10.50

Manufacturer Part Number:: 703065

This is a genuine Murray Wing Knob used on the variety of Lawn and Garden equipment and is sold individually. This part is made out of durable Black Plastic. To ensure safe operation of equipment it is recommended to replace this Knob if original part has cracked or is broken.

BOLT, 5/16-18 X 3/4-INCH,

★★★★★

(3)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 5025145X6SM

Bearing, Ball 11/16x1

★★★★★

(7)

$10.40

Manufacturer Part Number:: 1705897SM

This authentic replacement part is designed for use with Craftsman snowblowers. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This bearing helps to secure the arbor shaft, allowing it to rotate. Bearings experience constant wear from pressure,...

Wheel,friction 4.3 Ru

★★★★★

(25)

$33.64

Manufacturer Part Number:: 1501435MA

This is an original part from Craftsman for use with Craftsman Snowblowers. The fiction wheel assembly meshes with the friction disc, causing the drive wheel axle to turn. The most common reason for replacing the friction wheel is when the snowblower's wheels don't turn.This part is sold individually. Disconnect the spark plug wire before installing this part. The tools that you will need to repla...

Lawn Mower Nut

★★★★★

(2)

$8.00

Manufacturer Part Number:: 703409

This is an OEM part sourced directly from the manufacturer. The nut is commonly found in lawn tractors and snowblowers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replaci...

Snow Blower Drive Belt

★★★★★

(23)

$25.66

Manufacturer Part Number:: 1733324SM

This is an authentic OEM sourced driver belt, not an aftermarket equivalent. It is specially designed for a variety of snow throwers. This is the main drive belt for the unit that will spin the augers. Please make sure to check appropriate diagrams for correct location and application of this item. It is made from durable rubber material and it is sold individually. You would need a set of wrench...

Snow Blower Greased Bearing

★★★★★

(7)

$14.42

Manufacturer Part Number:: 2108202SM

This is a Genuine Manufacturer Sourced replacement part used on Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to...

Snow Blower Assembly Chute

★★★★★

(26)

$59.02

Manufacturer Part Number:: 762222MA

Snow blower discharge chute.

Snow Blower Extension Spring

★★★★★

(6)

$10.50

Manufacturer Part Number:: 1736469YP

This part is an OEM from Craftsman for use with Snow Blowers. The extension spring is used to provide tension between the link rods, and disconnect arm which slows the riding lawnmower down when the speed control is pushed. The most common reason for replacing the spring is if the drive belt does not have enough tension to engage the auger pulley because the spring is broken. This part is sold ind...

Snow Blower Belt

★★★★★

(8)

$30.58

Manufacturer Part Number:: 585416MA

This Auger Drive Belt is an original part from Craftsman for use with Craftsman Snowblowers. The auger drive belt rotates the auger on the snowblower. The most common reason for replacing the drive belt is when the snowblower auger won't turn.This part is sold individually. Her is a list of tools that are needed to replace the auger drive belt are a 3/8 inch socket, 9/16 inch wrench, adjustable wrench and a clamp.

Simplicity Snow Blower Parts

Top Simplicity Snow Blower Models

Popular Simplicity Snow Blower Parts

Simplicity Snow Blower Models

Shop by Popular Simplicity Snow Blower Part Types

Simplicity Snow Blower Parts

Search By Model or Part Number

Top Simplicity Snow Blower Models

Popular Simplicity Snow Blower Parts

Simplicity Snow Blower Models

Shop by Popular Simplicity Snow Blower Part Types