Milwaukee Band Saw Parts
We sell only genuine OEM Milwaukee ® parts.
Top Milwaukee Band Saw Models
-
Milwaukee 6230 (SER 678D) 4-3/4 Inch Deep Cut Band Saw Parts
-
Milwaukee 6230 (SER 678-26651) 4-3/4 Inch Deep Cut Band Saw Parts
-
Milwaukee 6230 (SER 678B) 4-3/4 Inch Deep Cut Band Saw Parts
-
Milwaukee 6230 (SER 678-32001) 4-3/4 Inch Deep Cut Band Saw Parts
-
Milwaukee 6230 (SER 678C) 4-3/4 Inch Deep Cut Band Saw Parts
-
Milwaukee 6230 (SER 678F) 4-3/4 Inch Deep Cut Band Saw Parts
-
Milwaukee 6230 (SER 678J) 4-3/4 Inch Deep Cut Band Saw Parts
-
Milwaukee 6230 (SER 678E) 4-3/4 Inch Deep Cut Band Saw Parts
Popular Milwaukee Band Saw Parts
- Manufacturer Part Number:
- 45-96-0050
- Manufacturer Part Number:
- 45-69-0030
This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...
- Manufacturer Part Number:
- 42-40-0580
This is a genuine Milwaukee replacement part, it is sold individually. These sleeve bearings are installed on the Blade Pulley Axles on the Milwaukee Bandsaw models shown below. They fit inside of the Blade Pulleys When the blade on the bandsaw is not tracking properly, it may be time to replace them. There are four of these on each tool. This also would be a good time to replace the 45-69-0010 Bl...
- Manufacturer Part Number:
- 42-28-0025
This rear guide roller kit is an OEM item which is specially designed for Milwaukee band saws. The purpose of this component is to support and guide the blade. It is an identical replacement for a missing or a faulty item that was installed on a new unit. Note, this is the rear guide, the front guide is sold separately. Make sure to refer to the appropriate diagrams of your model for the correct l...
- Manufacturer Part Number:
- 14-34-0036
- Manufacturer Part Number:
- 42-28-0211
This is a genuine Milwaukee replacement part, it is sold individually. It is used on all the Bandsaw models shown below. The purpose of the Rear Blade Guide Assembly, is to keep the blade on the bandsaw blade tracking straight as you are cutting.. It also helps track the blade on the blade pulley. If your Blade Guide Block is in good shape and just the bearings are worn. You can order them indivi...
- Manufacturer Part Number:
- 42-24-0015
This is an authentic Milwaukee replacement part that is sourced from the original manufacturer to be used with portable band saws. The front roller guide is a complete replacement part assembly. This item attaches to the pulley support and is used to support the blade and to keep it on track. This item is priced as a single item.
- Manufacturer Part Number:
- 14-46-0465
This item has been sourced from the original manufacturer and is intended to be used with portable band saws from Milwaukee. The kit includes the bearings, washers, and bolts that are used to mount the guide block bracket and to keep the blade in the correct position to stay on track. This kit is priced as a single item.
- Manufacturer Part Number:
- 45-88-7165
Genuine Milwaukee replacement part, this item is sold individually. The Pulley Hub Washer is installed inside of the Blade Pulley Cover. It is a spacer to keep the Pulley Cover and Pulley tight in place when they are fastened together.
- Manufacturer Part Number:
- 22-18-0670
This is a genuine Milwaukee replacement part, it is sold individually. 2 of these Brushes are required in the tool listed below. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon ...
- Manufacturer Part Number:
- 22-18-0025
This manufacturer sourced replacement part is designed for use with Milwaukee band saws. It includes one (1) carbon brush with lead wire and a spring attached. Carbon brushes are commonly replaced item on power tools Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace bot...
- Manufacturer Part Number:
- 45-69-0010
This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The ti...
Milwaukee Band Saw Models
-
Milwaukee 6230 (SER 678D) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678-26651) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678B) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678-32001) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678C) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678F) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678J) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678E) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678G) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678-1105) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678-31501) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678A) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678H) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6230 (SER 678-1001) 4-3/4 Inch Deep Cut Band Saw
-
Milwaukee 6236 (SER 769A) Two Speed Deep Cut Bandsaw Band Saw
-
Milwaukee 6236 (SER 769F) Two Speed Deep Cut Bandsaw Band Saw
-
Milwaukee 6236 (SER 769-1001) Two Speed Deep Cut Bandsaw Band Saw
-
Milwaukee 6236 (SER 769D) Two Speed Deep Cut Bandsaw Band Saw
-
Milwaukee 6236 (SER 769B) Two Speed Deep Cut Bandsaw Band Saw
-
Milwaukee 6236 (SER 769G) Two Speed Deep Cut Bandsaw Band Saw