Makita Sander Parts
We sell only genuine OEM Makita ® parts.
Top Makita Sander Models
-
Makita BO5041 Sander Parts
-
Makita XOB01 Sander Parts
-
Makita BO5030K Sander Parts
-
Makita 9910X Sander Parts
-
Makita BO6050J Sander Parts
-
Makita BO5012K Sander Parts
-
Makita LXOB01 Sander Parts
-
Makita BO4556K Sander Parts
Popular Makita Sander Parts
- Manufacturer Part Number:
- 158324-9
This is a genuine Makita replacement part, it is sold individually.
It has a soft foam pad with a metal backing.
It has six vacuum holes for use with the 166078-4 Dust bag.
It is remove by unscrewing four 266020-6 Screws.
The sandpaper is held by two clamps on the base assembly.
- Manufacturer Part Number:
- CB204
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New br...
- Manufacturer Part Number:
- 682502-4
This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool ...
- Manufacturer Part Number:
- 681656-4
it is an authentic high quality Makita replacement part that is specially manufactured for use with sanders and grinders. This is the insulation washer for the armature, please make sure to check appropriate diagrams for correct location and use of this item. One durable plastic washer is included per order.
- Manufacturer Part Number:
- 743081-8
This hook-and-loop sander pad is a direct replacement for many Makita orbital sanders. It is a genuine Makita part, not off-brand. It features a foam body attached to a hard plastic backing plate. It also has a sturdy Velcro style bottom for use with hook-and-loop sandpaper. This pad has eight vacuum holes and is 5" in diameter. This pad is compatible with the Makita sanders listed below.
- Manufacturer Part Number:
- 265812-0
This is an authentic OEM approved replacement part designed for use with Makita sanders. The purpose of this bolt is to secure the sandpaper disc to the pad. It is made out of metal and it is sold individually. To install or remove this bolt you would need a hex key/allen wrench.
- Manufacturer Part Number:
- 253951-8
Genuine OEM Authorized replacement part designed for Makita Disc Sanders. This part is made out of Metal and it is Sold Individually. This Washer helps to secure the Plastic Pad to the Unit. You would need a Hex Key/Allen Wrench to remove the Screw that secures it.
- Manufacturer Part Number:
- 651285-7
This is a Genuine Manufacturer Sourced replacement part used on Makita Sanders. This switch has a Plastic Body and Trigger. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure ...
- Manufacturer Part Number:
- 424131-5
This brake ring is an authentic component. It is sourced directly from the original equipment manufacturer for use with Makita sanders. The brake ring fits on top of the sander pad. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality plastic and is sold as an individual component. Check the diagrams of your model for the exact location and the co...
- Manufacturer Part Number:
- CB75
- Manufacturer Part Number:
- CB340
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page.
• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can ...
- Manufacturer Part Number:
- 651527-9
This is a Rocker type switch that has internal terminals. This is a genuine Makita replacement part that is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear ...
Makita Sander Models
-
Makita BO5041 Sander
-
Makita XOB01 Sander
-
Makita BO5030K Sander
-
Makita 9910X Sander
-
Makita BO6050J Sander
-
Makita BO5012K Sander
-
Makita LXOB01 Sander
-
Makita BO4556K Sander
-
Makita XOB01Z Sander
-
Makita 9237CX3 Sander
-
Makita 9035DW Sander
-
Makita BO6010 Sander
-
Makita BO4552K Sander
-
Makita GA7910 (Type 1) Sander
-
Makita BO5031 Sander
-
Makita LXOB01Z (Type 2) Sander
-
Makita PK5011C Sander
-
Makita 9911KX1 (Type 2) Sander
-
Makita PO5000CX1 Sander
-
Makita PK5011CX1 Sander