Sander Parts
We sell only genuine OEM parts.
OR
Popular Sander Brands
See All
Popular Sander Parts
- Manufacturer Part Number:
- 158324-9
This is a genuine Makita replacement part, it is sold individually.
It has a soft foam pad with a metal backing.
It has six vacuum holes for use with the 166078-4 Dust bag.
It is remove by unscrewing four 266020-6 Screws.
The sandpaper is held by two clamps on the base assembly.
- Manufacturer Part Number:
- N031653
Genuine Porter Cable replacement part includes 1 Carbon Brush with wire lead and brush spring attached.rn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wea...
- Manufacturer Part Number:
- CB340
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page.
• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can ...
- Manufacturer Part Number:
- 743081-8
This hook-and-loop sander pad is a direct replacement for many Makita orbital sanders. It is a genuine Makita part, not off-brand. It features a foam body attached to a hard plastic backing plate. It also has a sturdy Velcro style bottom for use with hook-and-loop sandpaper. This pad has eight vacuum holes and is 5" in diameter. This pad is compatible with the Makita sanders listed below.
- Manufacturer Part Number:
- 56027
Genuine Dynabrade replacement part, this item is sold individually. The purpose of the 56027 Muffler is to lessen the noise of the air coming from the exhaust of the tools listed below. It will also filter out the excess oil that is in the tool. Once these Inserts get dirty and clogged they should be replaced.
- Manufacturer Part Number:
- CM9-50-3105
This self-lubricating bushing is designed to provide durable support for rotating or moving components in stationary workshop equipment. Made from oil-impregnated material, it helps reduce friction and wear while maintaining smooth, stable operation under continuous use. Replacing a worn bushing restores proper alignment, minimizes vibration, and helps protect surrounding components, making it an ...
- Manufacturer Part Number:
- CB204
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New br...
- Manufacturer Part Number:
- C079489
This o-ring is an authentic manufacturer sourced replacement part, it is not an aftermarket imitation. It is specially made for Chicago Pneumatic air hammers and sanders. It helps to provide an air tight seal between connected parts. Please make sure to check appropriate diagrams for correct location and use of this item. It is made from durable rubber and it is sold individually.
- Manufacturer Part Number:
- 651285-7
This is a Genuine Manufacturer Sourced replacement part used on Makita Sanders. This switch has a Plastic Body and Trigger. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. To replace this switch you would need a Screwdriver. • First make sure ...
- Manufacturer Part Number:
- 682502-4
This cord guard is a genuine Makita replacement part, and it is a direct replacement for a damaged or missing cord guard. Power tool cords undergo a lot of stress, and these cord guards help to alleviate some of that stress at the weakest point--right where the cord enters the tool. Over time cord guards will deteriorate and eventually require replacement. Keeping a strong cord guard on your tool ...
- Manufacturer Part Number:
- CB75
- Manufacturer Part Number:
- 151553-00
Genuine OEM replacement part, this item is sold individually. The 151553-00 Dust Seal/Brake is a dual propose part. It is a Dust Seal to help prevent dust and debris from entering the motor assembly. It also acts as a Brake to keep the sanding pad at lower RPM so the sander will work properly. It is a good idea to replace this part when you are replacing the sanding pad.
Popular Sander Models
-
Dynabrade 58602
-
Chicago Pneumatic CP9778 (6151939778)
-
Ridgid R8606
-
Bosch OS50VC (3601B92910)
-
Bosch OS50VC (3601B92911)
-
Ridgid EB44243
-
Black and Decker 36070 (1)
-
Black and Decker 36070 (2)
-
Skil 7335 (F015733511)
-
Chicago Pneumatic CP7267E
-
Jet 649005K (22-44)
-
Chicago Pneumatic CP870 (T023990)
-
DeWALT DCE800B (Type 1)
-
Skil 7724 (Type-1)
-
Ingersoll Rand 317G
-
Jet 649004K (22-44)
All Sander Brands
Shop by Popular Sander Part Types
- Sander Bearings
- Sander Brackets and Flanges
- Sander Brushes
- Sander Caps and Lids
- Sander Fans and Blowers
- Sander Gears
- Sander Handles
- Sander Hoses and Tubes
- Sander Motors
- Sander Pulleys
- Sander Seals and Gaskets
- Sander Spindles
- Sander Springs and Shock Absorbers
- Sander Switches
- Sander Tune Up Kits
- Sander Valves
- Sander Wheels and Rollers
- Sander Wire Plugs and Connectors