Ridgid Drill Parts
We sell only genuine OEM Ridgid ® parts.
Top Ridgid Drill Models
-
Ridgid P660 18 Volt Pex Pinch Clamp Drill Parts
-
Ridgid R71211 1/2" Variable Speed Mud Mixer Drill Parts
-
Ridgid R70011 Drill Parts
-
Ridgid R83001 (PriorToG0344) 14.4 Volt 2 Speed Drill / Driver Parts
-
Ridgid R860053 Drill-Driver Parts
-
Ridgid R820071 12 Volt Drill 3-12-18 (Rev:08) Parts
-
Ridgid R860054 18 V Drill-Driver 12-27-17 (Rev:01) Parts
-
Ridgid R86009 18V Drill-Driver (Om 961152910) 6-8-18 (Rev:01) Parts
Popular Ridgid Drill Parts
- Manufacturer Part Number:
- 290036001
- Manufacturer Part Number:
- 672380006
This chuck is supplied directly from the original equipment manufacturer. Compatible with several Ridgid hammer drills, the heavy-duty chuck is fitted onto the c-ring of the gear box assembly. This durable metal item secures the drill bit, and is sold individually. A chuck key is needed for the installation.
- Manufacturer Part Number:
- 636181001
This is a genuine OEM sourced replacement part designed for use with nailers/staplers. It allows you to secure your tool to your belt for easy access. It is made out of metal and it is sold individually. Please note the screw used to secure it to the housing is sold separately.
- Manufacturer Part Number:
- 670799001
This is an authentic Ridgid replacement part manufactured for use with spade handle drills. The chuck is used to secure the drill bits. Chucks can wear down over time from normal use and may need to be replaced to continue using the drill. The chuck is sold individually, please note the retaining screw and chuck key are available separately.
- Manufacturer Part Number:
- 290255001
This replacement carbon brush is a genuine OEM sourced replacement part designed for use with a variety of power tools. This assembly includes one (1) carbon brush with a lead wire and a spring attached. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at ...
- Manufacturer Part Number:
- 672326001
This is an authentic replacement part manufactured for use with Ridgid spade handle drills and mud mixers. The chuck key is used to loosen and tighten the chuck when changing drill bits. This chuck key is available as an individual replacement part.
- Manufacturer Part Number:
- 670178004
This replacement chuck is a genuine Ridgid part that is designed for use with electric drills. It allows user to secure a drill bit, the ratcheting action clicks the jaws tightly into place for reduced bit slippage. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. One durable metal chuck with some plastic...
- Manufacturer Part Number:
- 690176004
It is an authentic manufacturer-sourced replacement chuck key which is specially designed for use with Ridgid and Ryobi hammer drills. The purpose of the part is to allow a user to tighten and loosen the jaws of the chuck. This item is made of durable metal and it is sold individually.
- Manufacturer Part Number:
- 760472008
The switch is made out of plastic. This genuine item is supplied by the original equipment manufacturer for use with Ridgid and Ryobi drills. It is available individually. During replacement, it may require a screwdriver to help install this part correctly. It may become broken and will need to be replaced.
- Manufacturer Part Number:
- 560963001
This is an original Ridgid replacement part manufactured for use with power tools. This bend relief is used to protect the power cord where it enters the tool which is a common stress point for the cord. This bend relief is sold individually.
- Manufacturer Part Number:
- 680301011
This is a genuine OEM sourced part which is specially designed for use with Ridgid drills. This chuck is used to secure a drill bit. If your drill's bit retention is suffering, the rotation feels stiff, or the chuck has seized up entirely, a new chuck should fix the problem. This high-quality 1/2 inch chuck is made of durable materials and is sold as an individual item. Please note, the screw to s...
- Manufacturer Part Number:
- 290069406
Genuine Ridgid replacement part, this item is sold individually. 2 of these Brushes are needed for a set. This Brush includes the Brush, Brush Holder, Brush Spring and plug in terminal. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New b...
Ridgid Drill Models
-
Ridgid P660 18 Volt Pex Pinch Clamp Drill
-
Ridgid R71211 1/2" Variable Speed Mud Mixer Drill
-
Ridgid R70011 Drill
-
Ridgid R83001 (PriorToG0344) 14.4 Volt 2 Speed Drill / Driver
-
Ridgid R860053 Drill-Driver
-
Ridgid R820071 12 Volt Drill 3-12-18 (Rev:08)
-
Ridgid R860054 18 V Drill-Driver 12-27-17 (Rev:01)
-
Ridgid R86009 18V Drill-Driver (Om 961152910) 6-8-18 (Rev:01)
-
Ridgid R86402 Megamax(Tm) Angle Drill Head 4-20-18 (Rev:01)
-
Ridgid R50111 Drill
-
Ridgid R84001 (PriorToG0344) 18.0 Volt 2 Speed Drill / Driver
-
Ridgid R82015 (PriorG0343) 12 Volt 2 Max Hc Speed Drill / Driver