OEM Shimano Conventional Reels Parts – eReplacementParts.com

Line Guide Pawl

★★★★★

(2)

$5.95

Manufacturer Part Number:: 10BHQ

Washer

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 105PW

This item has been sourced from the original manufacturer to ensure a high level of quality to repair fishing reels from Shimano. The washer is used to provide spacing side cover and the star drag lever and handle. This item is priced as an individual replacement part.

Click Pin

★★★★★

(5)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 109ZZ

This authentic component is an OEM part which is designed for Shimano fishing reels. It is an important part of the drag mechanism that applies tension on the line preventing it from reeling out too fast. This is an identical replacement for a damaged or a faulty hardware that was installed on a new unit. One durable metal click pin is included. Check the diagrams of your model for the exact locat...

Rod Clamp Nut A (accessory)

★★★★★

(1)

$5.95

Manufacturer Part Number:: 10JC3

The rod clamp nut connects to the rod clamp. This is an original Shimano part for use in reels. Keep in mind this high-quality part is made of metal and is sold individually. During replacement, it may require a screwdriver to help install the nut correctly. This part may become broken and will need to be replaced.

Spool Tension Spacer (a)

★★★★★

(2)

$5.95

Manufacturer Part Number:: 1085F

It is an authentic OEM item which is designed for Shimano fishing reels. This is a special spacer that is utilized to apply tension on the spool. If the washer is worn it may result in a backlash and the line overextending under a heavy load. Over time due to friction it may wear out or get damaged otherwise, eventually requiring a replacement. Make sure to check the diagram of your specific model...

Line Guide Pawl

★★★★★

(1)

$5.95

Manufacturer Part Number:: 10FJ9

This is a Genuine Manufacturer Sourced replacement part used on some Shimano Fishing Reels. This part is made out of Metal and it is Sold Individually. If Line guide (level wind) will not travel when cranking, replacing Line Guide Pawl may resolve the issue.

Cast Control Spacer

★★★★★

(2)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 10896

This is an authentic item which is supplied by the original manufacturer for Shimano fishing reels. It is the special spacer that is utilized to provide a tight seal between the cast control mechanism components. Over time the material may wear out and begin to crack eventually requiring a replacement. Note, this item is made of a durable material and is sold as an individual component. Check the ...

Rod Clamp Nut A (accessory)

$5.95

Manufacturer Part Number:: 10JC4

This is a genuine item that is supplied by the original equipment manufacturer for use with Shimano fishing reels. It is a high-quality replacement for a missing or damaged rod clamp nut, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

Click Spring

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 10HZ5

Line Guide Pawl

★★★★★

(15)

$5.95

Manufacturer Part Number:: 10FFZ

This is an authentic replacement part which is supplied by the original manufacturer. The line guide pawl is designed for use with Shimano fishing reels. The purpose of this component is to interact with the line guide and the worm gear. It is an important part of the mechanism that guides the lines from the spool. You will require a screwdriver when replacing this item. It is advisable when remov...

Idle Gear D

$5.95

Manufacturer Part Number:: 10NXK

It is a genuine Shimano component which is specially designed for use with fishing reels. The gear is an important part of the unit which helps to drive the shaft. Unfortunately, over time it may wear out or get damaged eventually requiring a replacement to ensure your reel functions properly. One durable plastic idle gear is included. Refer to the appropriate diagram for your model for the correc...

Pawl Cap

★★★★★

(3)

$6.50

Manufacturer Part Number:: 10FJP

This pawl cap houses the pawl mechanism in your drag reel or baitcast reel, so that the related components are secure and properly aligned. It actively engages with gear teeth to prevent backward movement of the reel handle and unintended line unwinding. It is situated near the point where the handle connects to the reel body, on the side opposite the handle. To decide if the pawl cap needs to be ...

Shimano Conventional Reels Parts

Top Shimano Conventional Reels Models

Popular Shimano Conventional Reels Parts

Shimano Conventional Reels Models

Shimano Conventional Reels Parts

Search By Model or Part Number

Top Shimano Conventional Reels Models

Popular Shimano Conventional Reels Parts

Shimano Conventional Reels Models