eReplacementParts.com
866-322-9842
Milwaukee Parts
Repair Parts Home  Milwaukee Parts  Milwaukee Circular Saw Carbon Brushes

Milwaukee Circular Saw Carbon Brushes

Brush Assembly
Part Number: 22-18-0075
In Stock, 25+ available
Genuine Milwaukee replacement part.
Includes 1 Carbon Brush with wire lead, brush spring and bracket attached.
Two brushes are needed for the tools shown below.

• Worn brushes are often the cause behind a a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.


Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.
Carbon Brush
Part Number: 22-18-0730
In Stock, 25+ available
Genuine Milwaukee replacement part.
Includes 1 Carbon Brush with wire lead and brush spring attached.
2 of these brushes are need for the tools listed below.

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Brush Assembly
Part Number: 22-18-0035
In Stock, 25+ available
This is genuine replacement carbon brush sourced from original manufacturer. It is designed for use with Milwaukee circular saw. This assembly includes one (1) carbon brush with a lead wire and a spring attached.

Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type.

You would need a screwdriver to complete this job.

• Make sure the unit is unplugged
• Remove screws from the motor housing
• Take off motor cover to gain access to the brushes
• Take out old brushes and replace them with the new ones
• Re-assemble and test the tool
Carbon Brush And Spring
Part Number: 22-18-0550
In Stock, 25+ available
Genuine Milwaukee replacement part.
Includes 1 Carbon Brush with wire lead, brush spring and bracket attached.
Two brushes are needed for the tools shown below.

• Worn brushes are often the cause behind a a poorly running motor.
• Replacing brushes can fix an intermittently operating motor.
• New brushes can restore a motor’s electric braking.


Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.
Carbon Brush
Part Number: 22-16-0060
In Stock, 25+ available
This is a Genuine Milwaukee replacement brush used on Metal Cutting Circular Saws. This part Part is made out of Carbon and it has a Lead Wire Attached.

Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Carbon Brush
Part Number: 22-18-0065
In Stock, 22 available
This replacement carbon brush assembly is an authentic Milwaukee item that is specially designed for use with circular saws. It plays an important role by conducting electric current in power tools. This assembly includes one carbon brush with lead wire and a spring attached. It is recommended to replace both brushes at the same time.
Brush Assembly
Part Number: 22-18-1075
In Stock, 25+ available
This carbon brush assembly is an authentic Milwaukee replacement part. It is specially designed for use with a circular saw. Carbon brushes are a commonly replaced parts on power tools. Due to normal use and friction brushes will gradually wear down requiring replacement. This assembly includes one carbon brush with a lead wire and a spring attached. It is advised to replace both brushes at the same type. Please note, brush holders are sold separately.

You will need a screwdriver to complete this repair job.

• first make sure the saw is unplugged
• Remove screws from the motor housing
• Take off motor cover to gain access to the brushes
• Take out old brushes and replace them with the new ones
• Reassemble and test the unit
Carbon Brush and Spring (2 Required)
Part Number: 22-18-0147
In Stock, 25+ available
This replacement carbon brush is a genuine Milwaukee replacement part. It is commonly replaced item with a variety of power tools including circular saws. Most tools would have two (2) carbon brushes. Please not, this assembly includes one (1) carbon brush with a lead wire and a spring attached.

You would need a screwdriver to complete this job.

• Make sure the unit is unplugged
• First remove the brush cap
• Take our old brush and replace it with the new one
• Secure brush cap and test the tool
Brush Assembly - Black
Part Number: 22-18-1126
In Stock, 13 available
This is an authentic Milwaukee replacement part, sourced from the original manufacturer for use with circular saws. Brushes are considered wear items because they press against the commutator bars as the armature rotates. This brush is available as an individual replacement part.

Recommended Parts

• Brush Assembly - Red, part number: 22-18-1121
Brush Assembly - Red
Part Number: 22-18-1121
In Stock, 13 available
This part is available individually and is made of plastic and metal. The red brush assembly goes next to the brush tube. When replacing this part a screwdriver and a set of pliers might be required during the installation process. It will require replacing if it becomes broken. This is an authentic OEM sourced item which is specifically produced for use with Milwaukee circular saws.
Brush Assembly
Part Number: 22-18-0148
In Stock, 18 available
This replacement carbon brush assembly is sourced directly from the original equipment manufacturer for use with Milwaukee circular saws. The purpose of brushes is to conduct current in an electric motor that powers the tool. This assembly includes one high-quality carbon brush with a lead wire and a spring attached, please note it is advised to replace both brushes at the same time to ensure even wear.
Brush Holder
Part Number: 22-22-0260
In Stock, 4 available
This is a genuine manufacturer sourced replacement brush holder that is specially made for Milwaukee circular saws. This item holds carbon brush around the armature to provide stable and safe contact. This holder is made out of plastic with metal and it is sold individually. Please note carbon brushes are sold separately.
Brush Assy - Red
Part Number: 22-18-1240
Ships in 6 - 12 business days
This is an authentic Milwaukee replacement part. The brush assembly is designed by the manufacturer for use in circular saws. This part is a complete carbon brush with a metal connector wire, and it is used to provide electricity to the armature assembly. You may require a screwdriver when replacing this part. This item is sold individually.
Carbon Brush/Spring (2 Required)
Part Number: 22-18-0735
In Stock, 5 available
This is an authentic OEM authorized component which is specially designed for use with Milwaukee saw. The purpose of a brush is to conduct the current in an electric motor that powers the tool. Unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement to ensure the best performance. Keep in mind this high-quality brush/spring assembly is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component.
Brush Assy - Black
Part Number: 22-18-1245
Ships in 6 - 12 business days
This is an original replacement part sourced directly from the manufacturer. The brush assembly is commonly found in Milwaukee circular saws and metal cutting saws. This part is a carbon brush with attached metal connector wire, and it is used to provide electricity to the armature and field assembly. You may require a screwdriver when replacing this item. This brush assembly is sold as an individual replacement part. Please note that there are two different carbon brushes in the machine, and you may wish to replace them both at the same time for even wear.
Brush Top
Part Number: 22-18-1120
Ships in 6 - 12 business days
Brush Bottom
Part Number: 22-18-1125
Ships in 6 - 12 business days
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy