OEM Porter Cable Sander Parts & Accessories

$11.60

Manufacturer Part Number:: N031653

Genuine Porter Cable replacement part includes 1 Carbon Brush with wire lead and brush spring attached.rn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wea...

Sander Pad (5-inch)

★★★★★

(8)

$17.02

Manufacturer Part Number:: 151662-00

This Pad is designed for the "Adhesive Backed" Sanding Pads.rnThe (PSA) sander pad is a direct replacement for many Dewalt orbital sanders. It is a genuine Dewalt part, not off-brand. It features a foam body attached to a metal backing plate. It also has a sturdy smooth style bottom for use with sticky adhesive sandpaper. This pad does not have vacuum holes. It is 5" in diameter. This pad is co...

CORD

★★★★★

(9)

$36.48

Manufacturer Part Number:: 879182

This cord is a genuine Porter Cable replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 3 Prongs • 3 Wires • 18 Gauge • 7 Feet Long • Porter Cable models: 6302 T4, 6902 T5, T6

SWITCH

★★★★★

(3)

$19.13

Manufacturer Part Number:: 887453

This replacement switch is a high quality item sourced directly from original equipment manufacturer. It is specially made for used on Dewalt and Porter Cable power tools. It is the part that allows user to turn the tool on and off. These mechanical switches will over time wear our and fail requiring replacement. It is made out of durable plastic material and it is sold individually. No tools need...

SPINDLE & BRNG ASSY

★★★★★

(3)

$19.66

Manufacturer Part Number:: 872991

The spindle and bearing assembly goes between the eccentric hsg and the sander pad. It is made of metal and is sold individually. This part is an OEM from Porter Cable for use in sanders and polishers. A screwdriver and a set of pliers may be helpful when replacing this item. Over time this part may break and will need to be replaced.

O-Ring

★★★★★

(3)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 56194-00

O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure. The most common among power tools are: • Extrusion and Nibbling - The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off...

CAP

$5.95

Manufacturer Part Number:: 823727

This manufacturer sourced replacement part is designed for use with Delta and Porter Cable power tools. The purpose of the brush cap is to secure the carbon brush in the tool. This item is made from durable plastic and it is sold individually, to secure or remove it you will need a flat-head screwdriver.

FELT PAD

★★★★★

(8)

$60.89

Manufacturer Part Number:: 846456

Genuine Porter Cable replacement part. • Pad Dimensions: 9" by 4-1/2". Includes one pad. • Sturdy Felt Backing for long life. • Conveniently easy to take on and off. • 4 screw holes to keep your pad firmly attached. Can use existing screws on your tool, or go to the schematics page for your tool to find and order new screws.

COUNTERWEIGHT

$8.63

Manufacturer Part Number:: 874011

This is a genuine item that is supplied by the original equipment manufacturer for use with Porter Cable polishers and sanders. It is an identical replacement for a missing or damaged counterweight that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. This high-quality part is made...

WRENCH

★★★★★

(10)

$6.88

Manufacturer Part Number:: 692900

This replacement wrench is specially designed for Porter Cable sanders. This authentic part is sourced directly from original equipment manufacturer. It is used to allows you to change the back up pad. Angular profile of this item makes tightening/loosening hardware extremely easy. This wrench is made from metal and it is sold individually.

SPEED CONTROL

★★★★★

(4)

$33.20

Manufacturer Part Number:: N059511

This is an authentic replacement part for a Porter Cable Orbital Sander. This part is used to control the speed of the motor with 1 being the lowest speed setting and 6 being the fastest. The speed can be adjusted while the motor is running or while it is stopped. This part is sold as an individual replacement part. Please see your model's diagram for any parts associative to this.

PLATEN

★★★★★

(6)

$17.08

Manufacturer Part Number:: 148712-01

This is a genuine manufacturer-approved part which is specially designed for use with DeWALT and Porter Cable sanders. The platen helps to secure the sandpaper sheet. It is an identical replacement for a missing or a faulty component that was installed on a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct application of this part. ...

Porter Cable Sander Parts

Top Porter Cable Sander Models

Popular Porter Cable Sander Parts

Porter Cable Sander Models

Porter Cable Sander Parts

Search By Model or Part Number

Top Porter Cable Sander Models

Popular Porter Cable Sander Parts

Porter Cable Sander Models