eReplacementParts.com
866-322-9842
DeWALT Parts

O-Ring

Part Number: 56194-00
DeWALTPorter CableBlack and Decker
Availability: 6 in stock
Price: $3.99
Quantity:
Order within the next 9 hours
and your part ships today!
Product Information
Manufacturer: DeWALT, Porter Cable, Black and Decker
Product Number: 56194-00
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness.

There are many causes for O-Ring failure. The most common among power tools are:
  • Extrusion and Nibbling – The O-ring has ragged, tattered edges. These are commonly caused by pressure spikes which shear off tiny “bites” from the o-ring, or caused by clearance gaps.
  • Abrasion – One or both sides of the o-ring appear rough and slightly flattened. Commonly caused by a contact surface that is too rough, contains grit or is too smooth to allow lubrication.
  • Over Compression – The O-ring is flattened on both sides and may have a “ring” split along its length. Commonly caused by excessive pressure or heat.
  • Heat Hardening – The O-ring has a pitted or cracked surface, and is often flattened on both sides. Caused by temperature exceeding o-ring capacity.
  • Weather/Ozone Cracking – The O-ring is covered in small surface cracks. Caused by exposure to ozone, UV rays and air pollution. Excessive seal stretching (greater that 5%) causes similar cracking.
  • Compatibility

    This part is compatible with the following machines:

    DeWALT
    Porter Cable
    Black and Decker

    Products Compatibility

    This item works with the following types of products:

    • • Grinder
    • • Sander
    Questions & Answers

    No questions have been asked yet
    Repair Instructions: Submitted by Customers Like You
    1 of 1 people found this instruction helpful
    Tool Type:
    Sander
    Parts Used:
    Ball Bearing - 330003-13
    Dust Seal - 151553-00
    O-Ring - 56194-00
    Hook and Loop Sander Pad - 151281-08
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    Screwdriver
    Repairs went well.
    Replacement parts site supplied the the list of parts needed to repair the malfunction of my sander, they also described the malfunction. It doesn't get any better.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    O-Ring - 56194-00
    Bag and Wireform - 151429-00SV
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    30-60 minutes
    Tools Used:
    Screwdriver, Pliers
    THE ORIGINAL DEWALT ELECTRIC CORD SHEATH BEGAN TO DISINTEGRATE.
    It was simple. I removed the top back-half of the sander's body, unscrewed the old electric cord from the internal assembly, removed he cord, and replaced it with the new cord I bought from you, reattached the terminals, replaced the top half of the sander's body, and voila! Done. The sander worked perfectly.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    Random Orbit Belt - 903373
    O-Ring - 56194-00
    Dust Bag Assembly - A22897SV
    Nameplate - A10945
    Warning Label - A16309
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    15-30 minutes
    Tools Used:
    , Torqix wrench
    Sander would not orbital
    Remove the pad and replaced the belt. Replaced the dust collection system
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    O-Ring - 56194-00
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    Dust bag would not stay on
    Replaced missing o-ring
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    On-Off Switch - 144960-00
    Dust Bag - 608354-00SV
    O-Ring - 56194-00
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    15-30 minutes
    Tools Used:
    Screwdriver, Pliers, screwdriver
    bad switch,worn dust collector
    1. Removed top cover
    2. Removed on-off switch
    3. Replaced switch
    4. Replaced top cover
    5. Removed worn dust bag
    6. Replaced new dust bag
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    Dust Bag - 608354-00SV
    O-Ring - 56194-00
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    Old dust bag was worn
    Simply replaced the o-ring and the dust bag.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    O-Ring - 56194-00
    Dust Bag Asm - 386856-00
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    , Rubber Hammer
    DeWalt 5" orbit sander. Duct collector broke and replacement part was no longer available . Ereplacement parts had a retro fit part that worked and fit perfect .
    Remove old dust collector and replace with new part . No tools needed but a soft rubber hammer helps as the fit is tight .
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    O-Ring - 56194-00
    Dust Bag Asm - 386856-00
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    , No tools needed
    Needed new dust collector bag
    Removed the o-ring from the bottom shroud, and installed new one. Then simply pressed the new dust bag on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Tool Type:
    Sander
    Parts Used:
    Dust Bag - 608354-00SV
    O-Ring - 56194-00
    Repair Difficulty:
    Easy
    Time Spent Repairing:
    Less than 15 minutes
    Tools Used:
    , None required
    Needed new o ring and dust bag
    Removed the old o-ring from the base housing, and placed the new one on. Then installed the new dust bag assembly
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!
    Reviews
    5
    Average Rating (out of 5):
    1 Reviews
    Click to filter by ratings:
    5 stars
    1
    4 stars
    0
    3 stars
    0
    2 stars
    0
    1 stars
    0
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
  • Easy repair
    Worked great
    Eduardo - September 2, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: DeWALT, Porter Cable, Black and Decker
    Product Number: 56194-00
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    Related Products
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy