Honda Parts

Oil Seal 91202-ZL8-003

OEM part for: Honda

Part Number: 91202-ZL8-003


Install
Videos!
Oil Seal - 91202-ZL8-003:Honda 360 View
Oil Seal - 91202-ZL8-003:HondaOil Seal - 91202-ZL8-003:HondaOil Seal - 91202-ZL8-003:Honda 360 View
In Stock
Ships within 1 business day
Medium 30-60 minutes (16 rated repairs)?
OEM: Original Equipment Manufacturer ?
Honda Lawn Boy Toro

Product Description ?

This item is an authentic Honda replacement part and has been sourced from the original manufacturer to be used with small engines. The seal is used to prevent oil from leaking from between the crankcase and the crankshaft. The oil seal is available as an individual replacement part.

  • 28X41.25X6
  • Classification: Part
  • Weight: 0.03 lbs.
  • Shipping: Ships Worldwide

Compatibility

This Oil Seal will fit the following 398 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.

Displaying 20 of 398 matching models.

Don't see yours? Try searching our site for :

398 total model matches. Try the above search to narrow your results.

This is the official OEM part for the following brands:

  • Honda
  • Lawn Boy
  • Toro

This item works with the following types of products:

  • Engine
  • Lawn Mower
  • Snowblower

This part replaces obsolete part #: 91202-ZM0-V31

Customer Part Reviews ?

4.4
Average Rating (out of 5):
8 Reviews
Click to filter by ratings:
5 stars
6
4 stars
1
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • That was easy. Thanks
    Was able to find my exact engine ( really important), and the right part with all of the information that you provided. Took about 20min from start to finish. I'll make sure to use ya'll again.
    Guest - April 6, 2022 Verified Purchase
    Can on time and fixed my problem.
    Just what I needed. Fit perfect. No more leaks
    Guest - October 5, 2020 Verified Purchase
    pressure washer governor arm repair/replace.
    The governor arm was broke causing the pressure washer not to govern down when trigger was released. Had to split engine case. Remove pump. Removed pump and carb, and starter rope,but I don't think that is need, it just made it a little easier to inspect every thing while i had it apart. A little difficult going back together as the cases are angled and the have to be all the way back together before the case bolt holes will line up. It has alignment pins and they are a bit hard to get to go. takes some t lite tapping. Worked fine when i was done. All parts fit good, and were right.
    Dan - December 5, 2019 Verified Purchase
    Easy fix,works great.
    Perfect fit. Fast shipping. good quality.
    Guest - November 18, 2019 Verified Purchase
    Replace Honda drive shaft oil seal. Easy fix!
    Replacement arrived promptly, as advertised. Good service.
    Guest - August 1, 2019 Verified Purchase
    Easy Repair. Part worked fine.
    Part arrived on time and in excellent condition.
    Guest - April 23, 2019 Verified Purchase
    No problems. Very satisfied !!!
    Only place on the internet I order parts. Fast service,good prices ,good return policy. Only one negative. Sometimes shipping costs more than the part. I've told others of your company.
    Roger - April 6, 2020 Verified Purchase
    Did not fit it was to large.. Got the right one local...
    Not good...
    Guest - July 4, 2019 Verified Purchase
    eReplacementParts Team
    Hi Harold, Thank you for your review. Please accept our apologies that the oil seal you received was too large. We have contacted you privately regarding this situation.

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Oil Seal


    will this fit my engine honda gvx 670 gjah 1007160 tae2 need top crank seal
    Myron for model number gvx670 asked on 2022-06-19
    Hello Myron, thank you for writing. Yes, the number 91202-ZL8-003 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
    eReplacementParts Team June 19, 2022

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 30-60 minutes (16 rated repairs)?

    Oil leak out bottom of honda gcv190 vertical shaft.

    TIM - June 4, 2017
    👍 25 of 25 people found this instruction helpful
    Tool Type

    Engine

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Socket set, Wrench Set, Picks

    Removed three bolts holding pump to bottom of motor. Pried the old seal off shaft with pick set and screwdriver. Installed new seal over shaft and set into seat with a piece of PVC pipe same diameter (1"1/4 ) slid over shaft and tapped with hammer until fully seated. Reinstalled pump to bottom of motor.
    Oil leak fixed thanks to ereplacement parts and 45 min of my time.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Oil seal on Honda powered pressure washer leak

    Michael - October 15, 2017
    👍 5 of 5 people found this instruction helpful
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set, Adjustable Wrench, Pick tool

    Removed pump from engine - 3 bolts
    Removed damaged oil seal with pick tool
    Applied bearing grease to new seal
    Installed new seal and pressed into place to seat well
    Re-assembled pump to engine insuring woodruff key on motor shaft engaged to slot on pump
    Filled crankcase with fresh oil
    Pressure washer works like new!

    Thanks to eReplacement Parts for providing correct part in 2 days-and saving me $$
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bad oil seal

    brian - December 14, 2016
    👍 5 of 5 people found this instruction helpful
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Pliers, Wrench Set

    Removed the old seal and installed the new one.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Engine would not maintain proper speed.

    Glen - April 7, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Engine

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Screwdriver, Nutdriver, Hammer

    Disassemble engine at the oil pan, remove the governor and oil seal, clean all parts, install a new oil seal and governor, apply RTV to the oil pan and reassemble. Torque all bolts on the oil pan. Adjust the governor arm and shaft. Install the governor spring and adjust for my speed 3500 RPM. Worked great.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Oil leaking under the mower.

    Roy - September 13, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Lawn Mower

    Difficulty

    Medium

    Time

    More than 2 hours

    Tools Used

    Screwdriver, Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Adjustable Wrench

    1. Turned the mower over (after the oil and gas were drained).
    2. Removed the blade.
    3. At this point, I pulled out the parts diagram.
    4. The clutch was removed from the crankshaft (clean the clutch with brake cleaner or carb cleaner to remove oil, dry completely before reassembly).
    5. The oil seal (after 26 years of service) had gone bad
    6. Replaced the seal and put it all back together.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pressure washer was leaking water, seal was leaking oil

    Glenn - February 22, 2024
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    30-60 minutes

    Tools Used

    Socket set, Seal remover tool

    1 removed retaining nuts
    2 pulled off old pump
    3 removed old engine oil seal
    4 put on new engine oil seal
    5 put on new pump
    6 tightened nuts
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Power washer engine bottom oil seal began leaking badly

    Jason - June 7, 2022
    Tool Type

    Engine

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Socket set, Wrench Set, Pick hook

    Removed three bolts holding the pump and engine to the frame. Pump slid off the bottom shaft easily. Removed engine from the frame and placed on workbench tilted back. I used a pick hook to pull what was left of the old bottom main seal out. I cut a small piece of PVC pipe to easily press the new oil seal into place. Reassembled the unit and filled with new oil. Works like new now.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Crankshaft deal leaking

    Richard - August 19, 2020
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    , PVC pipe

    Removed seal with pick and hook tool. Set new seal with 3/4 inch PVC pipe.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Oil seal wore out

    ronald - July 13, 2020
    Tool Type

    Engine

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Drove in the oil seal.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The engine was leaking oil from the seal

    Diane - May 16, 2020
    Tool Type

    Pressure Washer

    Difficulty

    Medium

    Time

    15-30 minutes

    Tools Used

    Pliers, Power Drill, Socket set, Wrench Set, pvc pipe and hammer

    Removed engine and pump assembly from the pressure washer frame. Removed the pump from the engine. Removed the old seal by drilling a small hole in it, and then carefully inserting a screw to back it out. Installed new seal using a piece of pvc pipe about the same diameter as the seal to carefully set it in place with a hammer. Reinstalled pump with new shaft key, and reattached assembly to the frame. Good to go with no leaks!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Learn More

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal
    Recent searches:
    Suggested searches:
    Models:
    Manufacturers:
    Need help finding your model number?