Watch The
Repair Video

Nut-Flange, Ni

Part Number: 104-8301

Order within the next 1 hour

and your part ships today!

Questions & Answers

Repair Instructions

Product Information

Description:

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this high-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

Warning: California's Proposition 65

Frequently Purchased With

Nut-Lock, Ni
$2.99

Compatibility

This part is compatible with the following machines:

Toro

Expand the 150+ compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

Tool Type:

Lawn Tractor

Parts Used:

Screw-Carr - 3230-23

Washer-Flat - 3256-23

Nut-Flange, Ni - 104-8300

Pin-Cotter, Hair - 1-806003

Nut-Flange, Ni - 104-8301

RH Hanger Bracket - 131-4138

Screw-Shoulder, Hhf - 120-7024

Pin-Clevis - 110-0618

Bracket-Hanger, Lh - 131-1091

Rod-Level, Deck - 131-0955

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Ratchet Strap

Deck Leveling Problem

I ordered the parts and received the correct parts on time from ereplacement parts. They always send me the right parts. I changed out the parts because some of them were worn out. After replacing and adjusting the level, my cut was still uneven. I discovered that the support rod that lifts and lowers the deck had come out of its socket. I ended up having to use a Ratchet strap to slightly bend the bar so that I could position it back in the slot. Now, along with the new parts, my deck is level!!!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Idler Pulley - 132-9420

Nut-Flange, Ni - 104-8301

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

Pulley broke

Removed and replaced pulley on the mowing deck. Re-installed belt.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Washer-Flat - 3256-24

Screw-Hh - 323-7

Screw-Hh - 323-9

Idler Pulley - 132-9420

Washer-Friction, Composite - 114-0463

Spacer - 115-4986

Nut-Flange, Ni - 104-8301

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Spray lube

Tension pulley wore out and popped off. Replaced all on deck while repairing the one.

Hardest part was reaching between deck and mower frame. But was less time consuming than dropping and pulling deck out. Used pliers to unhook tension spring then removed pulleys. Similar step to replace.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Bolt-Shoulder - 112-3977

Nut-Flange, Ni - 104-8301

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set, Wrench Set

deck well shoulder bolt broke and I damaged the deck wheel

1. raised unit off the ground with electric ceiling mounted lift.
2. removed old belt and installed new belts
3. removed new parts from package.
4. Applied grease to shoulder bolt,
5. Put the new shoulder through deck wheel, installed nut and tighten.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information

Nut-Flange,​ Ni

Nut-Flange, Ni