eReplacementParts.com
877-346-4814
Ryobi Parts
Repair Parts Home
  
Power Tool Parts
  
Ryobi Parts
  030157001018 Hook And Loop Backing Pad

Hook And Loop Backing Pad 030157001018

OEM part for: Ryobi

Part Number: 030157001018


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 13 hours and your part ships today!
Easy Less than 15 minutes (39 rated repairs)?
OEM: Original Equipment Manufacturer ?
Ryobi
Does this d-block d-md-none fit my product?

Product Description ?

This sander pad is compatible with the Ryobi random orbit sander listed below.
It is genuine Ryobi replacement part.
The pad features a durable foam body attached to a hard plastic backing plate.
It is a five inch diameter pad with a hook-and-loop style underside for use with Hook and Loop type sandpaper.
This pad has eight vacuum holes.

Hook and Loop sandpaper has become very popular over the past few years, because of the ease of changing sandpaper grits when needed.

  • Classification: Part
  • Weight: 0.05 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 3 machines

Ryobi

RS290 Random Orbit Sander View Diagrams & Manuals
RS290G Random Orbit Sander View Diagrams & Manuals
P411 Random Orbit Sander View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Sander Parts

Customer Part Reviews ?

4.6
Average Rating (out of 5):
24 Reviews
Click to filter by ratings:
5 stars
19
4 stars
3
3 stars
0
2 stars
1
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Just what I was hoping to find.
    Spoke with the RYOBI rep at my local Home Depot who directed me to the website. Found exactly the replacement part that I needed.
    Guest - 14 days ago Verified Purchase
    GREAT JOB!!
    Quick service, perfect fit for part, sander never worked better.
    Guest - September 28, 2023 Verified Purchase
    Easy Repai
    perfect just what I needed!
    Miguel G - September 5, 2023 Verified Purchase
    Great service every time
    Direct replacement
    terry - August 25, 2023 Verified Purchase
    Delighted to find this hard-to-find part!
    I love my 6" Ryobi sander and have used it to finish thousands of board feet of trim, refurbish 100+ year old flooring and wainscoting, and so much more so I was heartbroken when the backing pad fell apart after 15+ years. So happy to have found ereplacementparts.com as the motor was still humming along on my sander and the new sanders didn't seem to have the same heft. My order came as expected and I had it on my sander and testing it all out within 15 minutes. Thank you so much... I'm off to get a wonderful but old pine floor refinished! -- Elaine in Eureka Springs, Arkansas
    Guest - February 20, 2023 Verified Purchase
    Replacing it
    I am having a hard time getting the screws out to replace it.
    Diane - December 7, 2022 Verified Purchase
    Quick and easy site
    It was very easy to find and order the part I needed.
    Guest - October 7, 2022 Verified Purchase
    replacement part website
    Pleasantly surprised. Part fit perfectly and was easy to replace. Was able to do the sanding I needed to do without a lot of effort. Already penciled you in to my contacts list for future use. Thank you and bye-bye
    Guest - August 15, 2022 Verified Purchase
    Just what I needed
    The part arrived quickly. It was easy to use the website to find what part I needed. Easier to match parts than gamble on Amazon, the pricing was the same. It fits my sander and keeps hold on the sandpaper.
    Guest - January 13, 2022 Verified Purchase
    Very easy repair
    The part was exactly what was needed
    Guest - November 4, 2021 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Hook And Loop Backing Pad


    Replacement pad r2600
    Ken for model number R2600 asked on 2023-03-27
    Hello Ken, We are glad you asked! The correct Hook and Loop Disc is 300527002. We are pleased to have been able to help.
    eReplacementParts Team March 27, 2023

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (39 rated repairs)?

    Hook an loop started to fall apart

    Ronald - May 31, 2016
    👍 7 of 7 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    Took out the four screws, removed the old pad, and screwed the new one on.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sanding discs did not stay in place

    William - February 17, 2016
    👍 4 of 4 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the four screws holding the hook and loop pad to the sander.
    Remove the pad and replace with the new pad.
    Re-fasten the four screws.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pad had separated

    Linda - July 3, 2016
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    It was a cinch to replace the part. Took less than 5 minutes, even though I'm a 72 yr old woman with minimal tool skills. Thanks so much!
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Replace old worn pad

    louis - January 9, 2016
    👍 3 of 3 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove the 4 screws holding the worn pad on the sander. Install the new pad with the 4 screws.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The hook pad disintegrate And the rubber guard around it.

    Leonel - March 19, 2017
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    1.You must separate the sander case. comes apart in 2 pieces in half.
    2. In order to take the case apart you have to remove about 10 screws.
    3. Insert replacement parts.
    4. Re-screw case back together average 30 minutes .
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Pad came lose from sander

    Bill - January 22, 2017
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1 Remove the 4 screws
    2 Removed the pad
    3 Replaced pad
    4 Replaced screws
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sand paper wouldn't stick to the old hook and loop

    charles - November 11, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Remove four screws to take the old pad off
    Use the same screws to put the new pad on
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Sander pad separated

    Daniel - August 29, 2016
    👍 3 of 5 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed four screws. Installed new part with the old screws.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brake had broken previously; backing pad fell apart over time.

    Donald - June 12, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Snapped in the brake - took a straight-edged screwdriver to work the brake into the slots, then four Phillips head screws to secured the backing pad.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brake and hook pad woreout

    michael - May 23, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Sander

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Take the four screws out of the old pad and take it off. Then take off the old brake and put the new one on. Then put on the new pad using the four screws.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal