*This part replaces obsolete part #: 2910771118 and 2910761118.
Product Information
Description:
Genuine Bosch replacement part, this item is sold individually. The most popular use of this screw is to secure the Metal Foot Plate to the Base Plate of the Jig Saw models shown below. It is also used in a few of Bosch Orbital Sanders for the bearing flange. |
Frequently Purchased With
Compatibility
the 25 compatible machines
This part is compatible with the following machines:
Bosch
1290D (0601290139) Orbital Sander
1290 (0601290239) Orbital Sander
1584AVS (0601584651) Jig Saw
1584AVS (0601584651) Jig Saw
1584DVS (0601584839) Dustless "Clic" Jig Saw
1584DVS (0601584839) Dustless "Clic" Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587DVS (0601587839) Dustless "Clic" Jig Saw
1587DVS (0601587839) Dustless "Clic" Jig Saw
1581DVS (0601581434) Dustless Jig Saw
1290 (0601290239) Orbital Sander
1584AVS (0601584651) Jig Saw
1584AVS (0601584651) Jig Saw
1584DVS (0601584839) Dustless "Clic" Jig Saw
1584DVS (0601584839) Dustless "Clic" Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587AVS (0601587651) Jig Saw
1587DVS (0601587839) Dustless "Clic" Jig Saw
1587DVS (0601587839) Dustless "Clic" Jig Saw
1581DVS (0601581434) Dustless Jig Saw
1581DVS (0601581434) Dustless Jig Saw
1581DVS (0601581934) Dustless Jig Saw
1581DVS (0601581934) Dustless Jig Saw
1582DVS (0601582934) Dustless "Clic" Jig Saw
1582DVS (0601582934) Dustless "Clic" Jig Saw
1587AVS (0601587683) Jig Saw
1587AVS (0601587683) Jig Saw
1587AVS (0601587684) Jig Saw
1587AVS (0601587684) Jig Saw
GSS28A (0601288139) Orbital Sander
1587AVSP1 (0601587692) Jig Saw
130.27719 (0601587880) Jig Saw
1581DVS (0601581934) Dustless Jig Saw
1581DVS (0601581934) Dustless Jig Saw
1582DVS (0601582934) Dustless "Clic" Jig Saw
1582DVS (0601582934) Dustless "Clic" Jig Saw
1587AVS (0601587683) Jig Saw
1587AVS (0601587683) Jig Saw
1587AVS (0601587684) Jig Saw
1587AVS (0601587684) Jig Saw
GSS28A (0601288139) Orbital Sander
1587AVSP1 (0601587692) Jig Saw
130.27719 (0601587880) Jig Saw
Products Compatibility
This item works with the following types of products:
- • Jig saw
- • Sander
- • Saw
Questions & Answers for Countersunk Screw
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Jig saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Hammer, small punch
Bent base plate
Remove blade, assemble base plate and metal work board with 4 countersunk screws. Remove old base plate with allen wrench, install new base plate, drive out set pin on roller set bracket and remove, install new roller set bracket, reinstall blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Jig saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Replaced factory screws on bottom plate that had gone missing after 15 years' use.
Took out remaining flathead screws and replaced them and the missing ones with new Phillips head screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information