Watch The
Repair Video

Carburetor C1u-K52

Part Number: 12520013317

3 Reviews

Ships within 1 business day

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 12520013314, 12520049030, 12520013316, 12520052130, 12520052131, 12520013311, 12520013313 and 12520013312.

Product Information

Description:

This genuine replacement part is designed for use with Echo trimmers, edgers and pruners. It is sourced directly from original equipment manufacturer and it is sold individually. Carburetor plays a key role in a gas powered equipment as it mixes the gas and air before the mix goes into the engine. This is a metal body carburetor with a rubber primer bulb. Please note, gaskets are sold separately.

To replace this carburetor assembly you will need a screwdriver.

• Remove the rear cover
• Remove the carburetor
• Remove the fuel filter
• Install the fuel filter
• Install the carburetor
• Re-assemble and test the unit

Warning: California's Proposition 65

Compatibility

This part is compatible with the following machines:

Echo

PP-800 (Type 1E) (001001-055504) Power Pruner
PP-800 (Type 1E) (After S/N 001001) Power Pruner
PP-800 (Type 1E) (055505-501000) Power Pruner
PPF-2100 (Type 1E) (001001-506099) Power Pruner Fixed Shaft
PPF-2100 (Type 1E) (506100-509499) Power Pruner Fixed Shaft
PPF-2100 (Type 1E) (After S/N 509500) Power Pruner Fixed Shaft
PPF-2110 (Type 1E) (001001-506099) Power Pruner Fixed Shaft
PPF-2110 (Type 1E) (After S/N 501890) Power Pruner Fixed Shaft
SHR-210 (05001001 - 05999999) Power Sprayer
PE-2000 (Type 1) (After S/N 001001) Edger
PE-2000 (Type 1E) (After S/N 001001) Edger
PE-2000 (Type 2E) (After S/N 001001) Edger
HCA-2400 (After S/N 005910) Hedge Clipper Articulating
HCA-2400 (001001-005909) Hedge Clipper Articulating
LHE-2475 (001001-002703)
LHE-2475 (After S/N 002704)
LST-2450 (001001-002506)
LST-2450 (002507-007999)
LST-2450 (After S/N 008000)
TT-24 (After S/N 001001)
TT-24A (After S/N 001001)
SHC-1700 (Type 1) (After S/N 001001) Shaft Hedge Clipper
SHC-1700 (Type 1E) (501001 - 504767) Shaft Hedge Clipper
SHC-1700 (Type 1E) (After S/N 504768) Shaft Hedge Clipper
PPT-2100 (Type 1E) Power Pruner
SHC-2100 (Type 1) Shaft Hedge Clipper
SHC-2100 (Type 1E) Shaft Hedge Clipper
SRM-2100 (Type 1) (After SN 290323) Straight Shaft Trimmer/Brushcutter
SRM-2100SB (Type 1)(001001-008231) Straight Shaft Trimmer/Brushcutter Parts
PAS-2000 (Type 1E) Power Head Attachment
PAS-2100 (Type 1E) Power Head Attachment
PPSR-2122 (Type 1E) (001001-504999) Pruner
PPSR-2122 (Type 1E) (505000-999999) Pruner
TT-24A Power Pruner Lawn Equipment
PPF-2110 (1E)(501890-999999) Pole Saw Lawn Equipment
PPF-2100 (1E)(509500-999999) Pole Saw Lawn Equipment
SRM-2100SB (1)(001001 & Up) Trimmer Lawn Equipment
TT-24 Power Pruner Lawn Equipment
PE-2400 (040061-999999) Edger Lawn Equipment
SHR-210 Sprayer Lawn Equipment
PP-1250 (Type 1) Pole Saw Lawn Equipment
PP-1200 (Type 1) Pole Saw Lawn Equipment
SRM-2410 (Type 1) Trimmer Lawn Equipment
PP-1400 (Type 1) Pole Saw Lawn Equipment
LST-2450 (008000-999999) String Trimmer Lawn Equipment
HCA-2400 Articulating Hedge Clipper Lawn Equipment
SRM-2100 (1)(159491-999999) Trimmer Lawn Equipment
LHE-2475 (002704-999999) Edger Lawn Equipment
SRM-2400 (Type 1) Trimmer Lawn Equipment
GT-2000EZR (03001001-03999999) Trimmer Lawn Equipment
GT-2400 Trimmer Lawn Equipment
PP-800 (Type 1) Pole Saw Lawn Equipment

Expand the 105 compatible machines

Questions & Answers

Sort by

No questions have been asked yet

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Fuel Filter - A369000480

Spark Plug - Rcj-6y - 15901731730

Carburetor C1u-K52 - 12520013317

Air Filter - A226001410

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Wrench Set, 2 YouTube videos.

Watched 2 YouTube videos demonstrating how to replace the carburetor.
Removed the old spark plug.
Removed the throttle cable end from the carburetor.
Removed the air filter.
Removed the two bolts holding the carburetor.
Cleaned the mounting surface.
Installed new carburetor and replaced all the parts above in reverse order ending with a new spark plug and air filter. I also replaced the fuel filter. Filled it with fresh 2 cycle fuel and it started and ran perfectly on the second pull.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Intake Gasket - 13001642031

Carburetor C1u-K52 - 12520013317

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Trimmer was not getting fuel to engine.

Removed air filter.
Removed carb and fuel lines.
Removed gasket.
Installed new gasket.
Installed new carb and reconnected fuel lines.
Installed new air filter.
Replaced spark plug.
Trimmer runs like new!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Carburetor C1u-K52 - 12520013317

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Diaphragm was broken

Removed old carburetor and installed new carburetor.
Two screws and two fuel lines.
Set the high speed rpms
Then set the low idle rpms.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Trimmer

Parts Used:

Carburetor C1u-K52 - 12520013317

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Carburetor needed replaced

Removed old carburetor replaced with new one trimmer started second pull runs great.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Hedge Trimmer

Parts Used:

Carburetor C1u-K52 - 12520013317

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Running poorly.

1. Disconnected the fuel lines.
2. Removed the old carburetor.
3. Secured the new carburetor.
4. Reconnected the fuel lines.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Edger

Parts Used:

Carburetor C1u-K52 - 12520013317

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Carburetor was bad

Took the air filter off, removed the two bolts holding the carb. on. Disconnected the throttle cable and the to fuel lines. Removed the old carb. Reverse the steps to put the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Trimmer

Parts Used:

Carburetor C1u-K52 - 12520013317

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Carb was worn out

1. Removed carb
2. Replaced carb and replaced brittle gas lines

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

3 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

arrived on time, as advertised and return was easy. will definitely purchase again

arrived on time, as advertised and return was easy

Guest - August 11, 2020 Verified Purchase

Super easy fix

This very affordable part was a simple fix for a Echo string trimmer

Guest - August 12, 2019 Verified Purchase

Easy installation.

Came quickly. Working great

Guest - July 4, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information

Repair Guides

Articles:

How to Install a Filter Kit on an Echo Trimmer (Model SRM-225)

Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....

May 27, 2015