This is a genuine OEM sourced replacement carburetor assembly. It is commonly used on Honda engines. The purpose of this item is to mix air and gas before it is sent to the engine. If the engine doesn't start or starts and dies shortly after then replacing carburetor may resolve the issue. This metal body carburetor is sold individually.
Carburetor Assembly 16100-Z0L-862
OEM part for: Honda
Part Number: 16100-Z0L-862
7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 18 machines
Honda
This item works with the following types of products:
- Engine Parts
This part replaces obsolete part #: 16100-Z0L811, 16100-Z0L-861, 16100-Z0L-812
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Running rough and rpms surging
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
2. I disconnected the fuel line after moving the spring clip with pliers.
3. I connected the new carburetor to the two linkages and with new gaskets, reusing the spacer at the engine block. I also attached the fuel line and moved the spring clip back in place to secure the hose.
3. I tightened the 10 mm bolts that hold the carb in place.
4. I replaced the air cleaner element and then the spark plug (also changed the crankcase oil).
5. Runs great now!
Engine would only run while starting fluid was sprayed into intake.
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Pocket knife
1. Drained any remaining gasoline and removed air cleaner cover and air filter.
2. Removed 3 bolts holding air cleaner and carburetor.
3. Removed carburetor linkage and fuel line.
4. Cleaned all gasket surfaces.
5. Turned engine on side with intake port up to facilitate easy assembly.
6. Reattached carburetor linkage and fuel line to new carburetor.
7. Aligned gaskets, heat sink, carburetor, and air cleaner.
8. Dropped in 2 bolts holding carburetor, heat sink, engine, and air cleaner together.
9. Hand tightened these bolts.
10. Installed 3rd bolt holding air cleaner and hand tightened.
11. Fully tightened 2 bolts holding carburetor to engine, then 3rd bolt holding air cleaner.
12. Reinstalled air filter and air cleaner cover.
13, Installed a new spark plug.
14. Added gasoline and started engine.
Motor would not run
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set
Parts Used
Gas dripping from carb while running. Would only run on half choke
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set
Could only start the engine with starter fluid, but engine would not continue running
Tool Type
Engine
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Replaced carburetor on my log splitter.
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Did not idle
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, None
Parts Used
Installed new carburetor
Clogged carburetor
Tool Type
Engine
Difficulty
Medium
Time
30-60 minutes
Tools Used
Pliers, Socket set
Parts Used
2. Researched engine type.
3. Ordered new carb and gaskets
4. Received new carb, but it was damaged during shipping.
5. Called to get a replacement carb sent out.
6. Received another carb in good condition
7. Installed carb and gaskets
8. Gassed her up and she worked like a champ.
Thanks for sending a new carb so quickly. Refund (RMA) was handled with no problems.
Will certainly use ereplacementparts.com for future projects!
Engine only runs on starting fluid.
Tool Type
Engine
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set
Tried to soak carb but would not come clean, decided to replace carb assembly
Tool Type
Engine
Difficulty
Medium
Time
15-30 minutes
Tools Used
Pliers, Nutdriver
2. Aligned gaskets, 3 separate gaskets, this was the tricky part since the bolts go through the air filter housing.
3. Tightened bolts
4. Re-installed throttle cable and governor spring
5. Reattached fuel line to carb
6. Attached gas shut-off valve to support
7. Installed air filter and cover
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.