This item is sourced directly from the original equipment manufacturer. It is specially designed for use with Husqvarna riding lawn mowers. The idler pulley helps to apply tension on the belt. Over time it may wear out or get damaged eventually requiring a replacement. It includes one durable plastic pulley with a metal ball bearing. Check the diagrams of your model for the exact location and the correct installation of this part. You will need a wrench to remove and secure the hardware that holds the idler pulley.
1. Removed all wheels.
2. Removed all plastic covers and housings for access to drive components.
3. Cleaned 5 pounds of mud/grass from inside front drive upper and lower covers.
4. Ground heavy rust from drive surfaces of front transmission pulley.
5. Replaced idler pulley which had a frozen bearing and belt burn
... Read moredamage.
6. Replaced belt.
7. Lubricated wheels, transmission axle bearings, and height adjusters.
8. Sharpened blade.
9. Reassembled and replaced the badly worn front left the wheel.
10. Adjusted drive control cable.
Read less
Did you find this story helpful?
Thank you for voting!
Drive belt was worn, and one of the drive pulleys was damaged
1) Remove the front plasticcover from the top of the mower deck & the bottom plastic cover from under the deck
2)I Removed the old belt using a screw driver, then installed the new belt.
3)After I installed the belt, I removed the damaged pulley from the center of the drive mechanism under the deck, and replaced it.
4)Re
... Read moreassembled the mower and tested successfully
Disassembled the lower cowlings, removed front drive axle on one side, removed rear belt securing flange, installed belt, pulleyGÇÖs the reassemble unit
Did you find this story helpful?
Thank you for voting!
1 pulley broke. 2 weeks earlier I replaced self-propel cable. not knowing pulley was probably fractured. It broke so I decided to replace belt, pulley and rear skirt.
Ordered parts. Arrived in 5 days. Removed blade removed cover over pulley and belt. Installed all new parts and adjusted self-propel cable. Runs like a new mower.
Removed and replaced pulleys, drive belt and controller. Still having a problem with reinstall of brake reset spring. Have searched high and low for diagram, instructions, video, etc. to show how to reinstall the spring. Absolutely nothing for my model relating to reinstallation of the brake reset spring. Dozens of videos for most any
... Read more other repair.
1) Removed belt guard
2) Removed old pulleys with socket drive
3) Removed rear plastic grass chute
4) Removed side cast aluminum part
5) Removed front plastic cover
6) Removed rear wheel gearbox pulley drive belt guard
7) Removed drive cable from gearbox
8) Removed belt
9) Replaced 3 frozen
... Read morepulleys and belt
10) Re-installed parts in reverse order
Read less
Did you find this story helpful?
Thank you for voting!
Pulley broke cutting belt
George from VENICE, Florida
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Lawn Mower
- Husqvarna Lawn Mower Model 96145001101 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(96145001100)_WW_1.gif "Part Location Diagram of 587973001 Husqvarna Pulley")
(96145001100)_WW_1.gif "Part Location Diagram of 587973001 Husqvarna Pulley")
