eReplacementParts.com
877-346-4814
Ridgid Parts
Repair Parts Home  Power Tool Parts  Ridgid Parts  089028007011 Throat Plate
photo thumbnailphoto thumbnail360 degree photo thumbnail

Throat Plate

Part Number: 089028007011
Availability: 25+ in stock
Price: $2.99
Order within the next 11 hours
and your part ships today!
Product Information
Manufacturer: Ridgid
Product Number: 089028007011
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Description:
This is a genuine manufacturer sourced replacement throat plate. It is specially produced for Ridgid compound miter saw. Throat plate plays an important role by reduce splintering and chip-out on the cuts. It also prevents thin slices of wood from jamming in between the blade and the plate during a cut. This throat plate is sold individually.

Please note, in order to use your compound miter saw, you must cut a slot through the zero clearance throat plate to allow for blade clearance.

• Set your saw at 0° miter, turn saw on and allow the blade to reach full speed
• Then carefully make a straight cut as far as it will go through the throat plate
• Turn your saw off and allow the blade to come to a complete stop before raising the saw arm
• Next, adjust the bevel angle to 45°, turn your saw on and allow the blade to reach full speed
• Then carefully make another cut through the zero clearance throat plate
• The slot in the throat plate will then be wide enough to allow the blade to pass through it at any angle from 0° to 45°
Compatibility

This part is compatible with the following machines:


Products Compatibility

This item works with the following types of products:

  • • Miter Saw
  • • Saw
Questions & Answers

Will this throat plate fit my saw it's a 12 inch sliding compund miter saw
Nick for model number Ms1290lza asked on 2018-11-13
Hello Nick, thank you for your question. Unfortunately, that part is not listed as a compatible part for your unit. The throat plate for your unit comes in two pieces, part number 829989 (two would completed the plate). Unfortunately, the part is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Will this throut plate fit the above mentioned saw?
Dennis asked on 2018-09-28
Hello Dennis, Thank you for the question. I looked up the part listed for the model number provided and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Throat Plate - 089028007011
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Wore out
Unscrewed old one, put the new one in and screwed down.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Throat Plate - 089028007011
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Throat Plate needed replacement on Rigid 12" Miter saw
Unscrewed the broken one and removed it
Screwed the new one on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Dust Chute - 089028007025
Throat Plate - 089028007011
Fence - 089028007007
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen Wrench
All three parts go tbroken while cutting a piece of aluminum
Removed all broken parts ordered new parts and reinstalled
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Throat Plate - 089028007011
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Needed new insert
Removed the screws from the old plate
Installed the new plate with the screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Throat Plate - 089028007011
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Worn out throat plate
Remove the screws from the worn out throat place and removed it
Screwed down the new throat plate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4
Average Rating (out of 5):
2 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
1
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Great part, fit like it should.
    My saw is up and working like it should.
    Guest - September 11, 2019 Verified Purchase
    Slow delivery ,wrong part
    Website made it difficult to get correct part ,then it took about 10 days to receive my order while I needed the tool.
    Guest - July 19, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Ridgid
    Product Number: 089028007011
    Classification: Part
    Weight: 0.06 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal