Product Information
Manufacturer: Poulan, Weed Eater |
Product Number: 530402879 |
Classification: Part |
Weight: 0.01 lbs. |
Shipping: Ships Worldwide |
Description:
This is a genuine replacement part manufactured for use with electric outdoor power equipment. Switches can wear out over time through normal use. A worn out switch may have trouble starting the machine, or may cause the machine to run intermittently. This switch is sold as an individual replacement part. |
Compatibility
the 26 compatible machines
This part is compatible with the following machines:
Poulan
ES300 Electric Chain Saw
ES300 Electric Chain Saw
ES350 Electric Chain Saw
ES350 Electric Chain Saw
ES350WT Electric Chain Saw
ES350WT Electric Chain Saw
400E Pro Electric Chainsaw
400E Pro Electric Chainsaw
ES300 Electric Chain Saw
ES350 Electric Chain Saw
ES350 Electric Chain Saw
ES350WT Electric Chain Saw
ES350WT Electric Chain Saw
400E Pro Electric Chainsaw
400E Pro Electric Chainsaw
400EX Pro Electric Chainsaw
400EX Pro Electric Chainsaw
ES400 Electric Saw
PP300E Electric Chainsaw
PP300E Electric Chainsaw
PP 400 E Chainsaw Electric
PP 400 EX Chainsaw Electric
400EX Pro Electric Chainsaw
ES400 Electric Saw
PP300E Electric Chainsaw
PP300E Electric Chainsaw
PP 400 E Chainsaw Electric
PP 400 EX Chainsaw Electric
Weed Eater
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Saw
- • Trimmer
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Trimmer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Switch not working
I removed the screws from the handle, then made a wiring diagram for the switch. Disconnected the wires from the old switch and connected them to the new switch. Placed the new switch where the old one was, then put the handle back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Electric chain saw would not run when trying to start it.
1. Removed all screws holding the case halves together.
2. Disconnected the two wires attached to the switch. Checked switch with continuity tester.
3. Replaced the switch with the new one.
4. Wiped clean all parts of the saw.
5. Put the case back together, tighten screws, attached chain and chain bar.
6. It works.
2. Disconnected the two wires attached to the switch. Checked switch with continuity tester.
3. Replaced the switch with the new one.
4. Wiped clean all parts of the saw.
5. Put the case back together, tighten screws, attached chain and chain bar.
6. It works.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle Nose Pliers
Plastic handle was broken beyond tape and glue!
Removed the screws from the broken parts.
Removed wiring and microswitch.
Replaced old microswitch with new since I was there.
Used Needle Nose Pliers to grip terinals on microswitch.
Reassembled handle halves.
Replaced the screws to prescribed tightness.
Road tested - OK!
Removed wiring and microswitch.
Replaced old microswitch with new since I was there.
Used Needle Nose Pliers to grip terinals on microswitch.
Reassembled handle halves.
Replaced the screws to prescribed tightness.
Road tested - OK!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Quick delivery and perfect fit
The switch came quickly and was an easy repair.
Guest -
December 10, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
Manufacturer: Poulan, Weed Eater |
Product Number: 530402879 |
Classification: Part |
Weight: 0.01 lbs. |
Shipping: Ships Worldwide |