Easy
15-30 minutes
This replacement switch is a high quality OEM item that is specially made for Makita circular saws. This switch is used to turn the tool on and off. It is plastic a plastic switch with metal terminals, over time mechanical components may begin to fail eventually requiring replacement. Please note this item is sold individually. To complete this repair you will need a screwdriver.
Switch Sges115c-3 651288-1
OEM part for: Makita
Part Number: 651288-1
$19.23
In Stock
Ships within 1 business day 
Compatibility
This item works with the following types of products:
- Circular Saw Parts
- Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
part worked, easy repair
Fast shipping
Guest -
6 days ago
Verified Purchase
Couldn’t have been easier.
The saw would not shut off so I ordered this part. Removed the switch housing, removed the two screws and replaced the switch. Put it back together and it works great now.
Robert -
July 27, 2023
Verified Purchase
Saw part
Easy to use website, fast delivery, would recommend and use again.
Guest -
March 10, 2022
Verified Purchase
great part worked perfectly
the switch i ordered was in great condition i received it quicker than expected and my saw now turns on and off again! thank you will order from them again if need be
Guest -
February 16, 2022
Verified Purchase
Painless repair
Arrived Quickly, swapped out easily.
David -
June 2, 2020
Verified Purchase
Saved me big
The part was the perfect fit. Take out the old and insert the new. My Makita saw is working like new.
Guest -
February 18, 2020
Verified Purchase
Great place to find repair parts
Saw switch fit perfectly and working like new in 5 minutes.
Guest -
July 16, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch Sges115c-3
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Switch would not turn off
Bernard - March 2, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Took the housing apart.
2. Removed the old switch.
3. Attached the new switch.
4. Reassembled.
2. Removed the old switch.
3. Attached the new switch.
4. Reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Control Switch Defective
Dennis - October 1, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the screws on the saw handle that holds the switch in place.
2. Removed the handle piece, pulled the switch from the handle.
3. Removed the electric wires running to the switch.
4. Reversed the procedure and ready to go!
2. Removed the handle piece, pulled the switch from the handle.
3. Removed the electric wires running to the switch.
4. Reversed the procedure and ready to go!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Circular saw will not shut off.
Peter - September 20, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed the 5 screws that hold the handle halves together.
Slid the switch out.
Disconnected the two wires to the switch.
Searched for the part number on the internet.
Ordered the replacement part.
When it arrived I installed the new switch and put everything back together.
Saw works fine now.
Thanks
Slid the switch out.
Disconnected the two wires to the switch.
Searched for the part number on the internet.
Ordered the replacement part.
When it arrived I installed the new switch and put everything back together.
Saw works fine now.
Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch didn't work
Deborah - April 8, 2016
👍 2 of 3 people found this instruction helpful
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Turned the screws out, opened the handle, took the switch out and disconnected the wires, reconnected to the new switch, put the switch back in place, closed the handle back in place and put the screws back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fault with and saw switch & would not shut off without unplugging.
Robert - July 25, 2023
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Removed the handle switch housing and screwed two terminals in and reassembled.
Couldn’t have been easier.
Couldn’t have been easier.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch was not working brushes need replacement
GLENN - March 2, 2022
Tool Type
Circular Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Disassembled the saw and replaced the switch and brushes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
On off switch malfunction.
David - April 2, 2021
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed screws. Lifted out old switch. Removed wires.Replaced wires on new switch.Placed new switch into position. Replaced cover and screws. Job done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The switch broke with power on when plugged in.
Mark - September 12, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the handle, swapped the switches by unscrewing and installing the wires to the switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the cicular saw needed a new switch
Vern - April 8, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
I took the cover off put the new switch in the saw works fine
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch broke
Pratt - February 23, 2019
Tool Type
Circular Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed screws on handle. removed 2 screws on switch. installed new switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
